'ROBOTS AND PICS'
I have uploaded a schematic to control 14 R/C servos for those interested.
The code for 2 x PIC16C84 is also included.
My site is at http://webhome.idirect.com/~bine
Bye for now
At 12:33 PM 10/19/97 -0400, you wrote:
>I have uploaded a schematic to control 14 R/C servos for those interested.
>The code for 2 x PIC16C84 is also included.
I have a controller for 16 R/C servos with output resolution at 1uS using a
PIC16C72, with inputs from either an R/C system or an RS-232-style serial
link. Uses only a 4MHz xtal, a programmable logic chip (for R/C system
input) and two external 74xx chips.
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
Hardware & Software for Industry & R/C Hobbies
"Go fast, turn right, and keep the wet side down!"
More... (looser matching)
- Last day of these posts
- In 1997
, 1998 only
- New search...