'RE (2): Question on comparators in PICs'
| Steve, read Frank's comment again - it was a JOKE!!!
CIAO - Martin.
______________________________ Reply Separator _________________________________
Subject: RE(2): Question on comparators in PICs
Author: pic microcontroller discussion list <MITVMA.MIT.EDU> at PICLIST
Date: 6/17/98 4:17 PM
I think you need to read this question again. It sounds ON THE TOPIC OF PICs to
---- PICLIST(a)MITVMA.MIT.EDU's Message ----
> I am setting up a comparator in my 16C620 PIC project to detect a low
> battery. I don't need two comparators, just one - and this results in the
> following question -
> If I use comparator 2, with comparator 1 disabled (CM2:0) = 101 can I still
> use the voltage reference module configured to input the voltage reference
> output onto RA2, one of the input lines of the comparator #2, and use the
> other comparator line RA1, as the input from an external reference signal?
Please keep these off-topic postings of this list. This is the PICLIST,
catering for all those who are water-injecting their MS-Outlook email
programs in order to unsubscribe from mailing lists.
More... (looser matching)
- Last day of these posts
- In 1998
, 1999 only
- New search...