Post by thread:RE(2): SIMICE Problem.

Dwayne, >First, check out the documentation - it describes all the jumper settings. >Its in a help file that was copied to the install directory where you >installed MPLAB. Note: if you have an old copy of MPLAB, you WON'T have >either the help file OR MPLAB support for SIMICE. I'm using 3.99.23 and >both the help file and SIMICE support are there (I've used it!). > >The help file is named: README.SII (ASCII text). > >I really don't know what else to suggest - it simply worked for me the first >(and only) time I tried it. What kinds of problems are you having? > >dwayne > > >Dwayne Reid <spam_OUTdwaynerTakeThisOuTplanet.eon.net> >Trinity Electronics Systems Ltd Edmonton, AB, CANADA >(403) 489-3199 voice (403) 487-6397 fax Thank you for your responce. You are of course right. My problem was the fact that I was using a 12C509 and the jumper settings that I needed just happened to be for that particular part. Thanks again. Best regards, Steven Steven Kosmerchock CELWAVE Phoenix Arizona USA Email: .....steve.kosmerchockKILLspam@spam@celwave.com http://www.geocities.com/researchtriangle/lab/6584 ---- PICLIST(a)MITVMA.MIT.EDU's Message ----