Searching \ for 'Prog to generate I2C stimulus files for MPLAB?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/i2cs.htm?key=i2c
Search entire site for: 'Prog to generate I2C stimulus files for MPLAB?'.

Truncated match.
PICList Thread
'Prog to generate I2C stimulus files for MPLAB?'
1997\12\19@163758 by Joe McCauley

picon face
Hi,

Does anyone know of a program which will run under MSDOS or Windows which
will genetate stimulus files for the mplab simulator. I need to generate
some I2C to test the I2C module on a 16C74. Unfortunatly I dont have a
16c74 pod for my Picmaster. Ideally what I am looking for would take in a
hex string representing the I2C data and ACK bits sent from a master to the
PIC, and generate the stim file.

Any ideas gratefully recieved.

Joe

1997\12\19@163758 by Joe McCauley

picon face
Hi,

Does anyone know of a program which will run under MSDOS or Windows which
will genetate stimulus files for the mplab simulator. I need to generate
some I2C to test the I2C module on a 16C74. Unfortunatly I dont have a
16c74 pod for my Picmaster. Ideally what I am looking for would take in a
hex string representing the I2C data and ACK bits sent from a master to the
PIC, and generate the stim file.

Any ideas gratefully recieved.

Joe

1997\12\19@170118 by Walter Markiw

flavicon
face
At 21:21 19/12/97 +0000, you wrote:
>Hi,
>
>Does anyone know of a program which will run under MSDOS or Windows which
>will genetate stimulus files for the mplab simulator. I need to generate
>some I2C to test the I2C module on a 16C74. Unfortunatly I dont have a
>16c74 pod for my Picmaster. Ideally what I am looking for would take in a
>hex string representing the I2C data and ACK bits sent from a master to the
>PIC, and generate the stim file.
>
>Any ideas gratefully recieved.
>
>Joe
>
>
Hi,Joe
       I read in the mplab manual that it doesm't support ssp simulation
in IC2 mode.

Cheers,Walter

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...