'PicBasic Pro with MPLAB??'
I just received my PBP compiler today, and I installed it to MPLAB 3.99.06
as indicated in the READ.ME file.
Everything to be OK until I hit BUILD. With the blink example I get the
Command line: "C:\PB-PRO\PBP.EXE -ampasm -oq -p16C63
PicBasic Pro Compiler 2.10, Copyright (c) 1998 microEngineering Labs, Inc.
All Rights Reserved.
MPLAB is unable to find output file "BLINK.HEX".
I don't know what I am doing wrong, would you help me???
I'm sure it must be something real easy, but I can't find out what...
I would expect that there is a BLINK.ERR file, open this and find the
errors, if it's like MPASM then your output message "can not find *.hex"
meand that build failed due to an error during program compilation.
Gabriel Gonzalez wrote:
|MPASM produces a .err file that may offer a clue.
Check that for your blink file (blink.err).
MPLAB can't find blink.hex because it didn't build correctly. I had
the same problem the first time I installed PBPro in MPLAB. I kept
P16F84.INC file not found error.
I changed the DOS path to include MPLAB where the P.inc files are
located. It still didn't work.
I finally copied all the P.inc files to the PBP directory and
everything worked correctly.
Try just copying the P16C63.inc file to the PBP directory and see if
---Gabriel Gonzalez <CHIH1.TELMEX.NET.MX> wrote: tgo
> I just received my PBP compiler today, and I installed it to MPLAB
> as indicated in the READ.ME file.
> Everything to be OK until I hit BUILD. With the blink example I get
> following error:
> Building BLINK.HEX...
> Compiling BLINK.BAS:
> Command line: "C:\PB-PRO\PBP.EXE -ampasm -oq -p16C63
> PicBasic Pro Compiler 2.10, Copyright (c) 1998 microEngineering
Check out our Large Character Serial LCD Modules!
See our new Serial Keypad Modules!
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
More... (looser matching)
- Last day of these posts
- In 1998
, 1999 only
- New search...