'Pic basic-- osc type'
How do I change the OSC type from XT (default) to HS or RC in PicBasic
Pro for a 16F877? Or does just defining
OSC to 20 do that for me?
To change the default OSC setting look in 16F877.inc
device pic16F877, xt_osc, wdt_on, pwrt_on, bod_on, lvp_off, cpd_off,
device pic16F877, HS_osc, wdt_on, pwrt_on, bod_on, lvp_off, cpd_off,
Subscribe to the PICBASIC list for more advise on the compiler. Go to the
Crownhill site to subscribe to it.
I'd advice not to change it *within* PicBasic Pro. So you get the
information XT in your .hex file. However, if loaded into your programming
software *and* before programming, you should be able to change the osc
type (AFAIK all sw should be capable to do it).
I hope this helps.
On Sat, 3 Jul 1999, Aaron Martin wrote:
> How do I change the OSC type from XT (default) to HS or RC in PicBasic
> Pro for a 16F877? Or does just defining
> OSC to 20 do that for me?
> Just wondering,
More... (looser matching)
- Last day of these posts
- In 1999
, 2000 only
- New search...