Searching \ for 'PICstart Plus errors with MPLAB under WinNT' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/languages.htm?key=mplab
Search entire site for: 'PICstart Plus errors with MPLAB under WinNT'.

Truncated match.
PICList Thread
'PICstart Plus errors with MPLAB under WinNT'
2000\03\27@134943 by Tobie Horswill

flavicon
face
Hi,

   Is anyone experiencing this to ? Under MPLAB 5.00 programing/verifying
to my Picstart Plus (firmware # 2.01.00) often results in the following
error message "Cannot receive. Please verify serial and power connections
and reset the programmer [0100,00,FF,FF]." It used to work fine under Win98
with the previous firmware revision. I'm not sure which of MPLAB (under NT)
or the programmer is the cause of this ... Of course, power and serial
cables are fine, I have no IRQ of device conflicts with my COM ports. All
other apps using the COM ports work fine. I recall reading something about
adding a capacitor between some pins of the ZIF socket for such programming
problems but can't seem to be able to find it again...

Thanks,

Tobie H.

2000\03\28@105718 by mike

flavicon
face
On Mon, 27 Mar 2000 13:42:54 -0500, you wrote:

>Hi,
>
>    Is anyone experiencing this to ? Under MPLAB 5.00 programing/verifying
>to my Picstart Plus (firmware # 2.01.00) often results in the following
>error message "Cannot receive. Please verify serial and power connections
>and reset the programmer [0100,00,FF,FF]." It used to work fine under Win98
>with the previous firmware revision. I'm not sure which of MPLAB (under NT)
>or the programmer is the cause of this ... Of course, power and serial
>cables are fine, I have no IRQ of device conflicts with my COM ports. All
>other apps using the COM ports work fine. I recall reading something about
>adding a capacitor between some pins of the ZIF socket for such programming
>problems but can't seem to be able to find it again...
>
>Thanks,
>
>Tobie H.
I've also seen this occasionally under win98. MPLAB4.12 works fine.  

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...