Searching \ for 'PIC16F876-04/SP' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devices.htm?key=16F
Search entire site for: 'PIC16F876-04/SP'.

Truncated match.
PICList Thread
'PIC16F876-04/SP'
1999\10\25@071520 by Peter Keller

flavicon
face
Hi
I am looking for some (5 - 10) PIC16F876-04 or -20/SP in DIL-Package.
All distributor I know are sold out.
Hardware is ready (without any microprocessor) and I have to start
programming within a few days so I can deliver 5 prototypes until mid
november.
Any help ?
Please send me an email privatly.
Peter

1999\10\25@093042 by Lawrence Lile

flavicon
face
You ain't alone, buddy!

I can't get any either.


-----Original Message-----
From: Peter Keller <spam_OUTpkellerTakeThisOuTspamDATALINK.CH>
To: .....PICLISTKILLspamspam@spam@MITVMA.MIT.EDU <PICLISTspamKILLspamMITVMA.MIT.EDU>
Date: Monday, October 25, 1999 6:19 AM
Subject: PIC16F876-04/SP


>Hi
>I am looking for some (5 - 10) PIC16F876-04 or -20/SP in DIL-Package.
>All distributor I know are sold out.
>Hardware is ready (without any microprocessor) and I have to start
>programming within a few days so I can deliver 5 prototypes until mid
>november.
>Any help ?
>Please send me an email privatly.
>Peter

1999\10\25@100355 by Kelvin Visteron

picon face
Digikey is claiming to be getting more in December. I'd like
to know what the hold up is on these Flash parts. It's
been over a year since MicroChip started telling us about these
parts!

On         Mon, 25 Oct 1999 13:18:43 +0100, Peter Keller wrote:

{Quote hidden}

________________________________________________________________
Get FREE voicemail, fax and email at http://voicemail.excite.com
Talk online at http://voicechat.excite.com

1999\10\25@141951 by Andy Kunz

flavicon
face
At 07:02 AM 10/25/1999 -0700, you wrote:
>Digikey is claiming to be getting more in December. I'd like
>to know what the hold up is on these Flash parts. It's
>been over a year since MicroChip started telling us about these
>parts!

December is what I'm being told for more of them in ANY pinout from other
sources, so it sounds reasonable.

Andy

==================================================================
Eternity is only a heartbeat away - are you ready?  Ask me how!
------------------------------------------------------------------
.....andyKILLspamspam.....rc-hydros.com      http://www.rc-hydros.com     - Race Boats
EraseMEandyspam_OUTspamTakeThisOuTmontanadesign.com  http://www.montanadesign.com - Electronics
==================================================================

1999\10\25@143228 by Peter Keller

flavicon
face
Thanks to all of you, but it does not help me. Probably I have to switch to
the 877.
Peter

Andy Kunz schrieb:

{Quote hidden}

1999\10\25@143607 by Andy Kunz

flavicon
face
At 08:34 PM 10/25/1999 +0100, you wrote:
>Thanks to all of you, but it does not help me. Probably I have to switch to
>the 877.

Same story.  December is the next shipment.

Andy

==================================================================
Eternity is only a heartbeat away - are you ready?  Ask me how!
------------------------------------------------------------------
KILLspamandyKILLspamspamrc-hydros.com      http://www.rc-hydros.com     - Race Boats
RemoveMEandyTakeThisOuTspammontanadesign.com  http://www.montanadesign.com - Electronics
==================================================================

1999\10\25@144016 by Peter Keller

flavicon
face
That's what tey say hier in switzerland - december !

Andy Kunz schrieb:

{Quote hidden}

1999\10\25@165112 by Don McKenzie

flavicon
face
Peter Keller wrote:
>
> Thanks to all of you, but it does not help me. Probably I have to switch to
> the 877.
> Peter

There is a simple PCB available that may make the transition back easier
for you if you are in the proto stage, as it has footprints for both the
dip 40 pin 877 and 28 pin 876.

http://www.dontronics.com/dt106.html

Don McKenzie  RemoveMEdonspamTakeThisOuTdontronics.com http://www.dontronics.com

Don's Download Dungeon:   http://www.dontronics.com/download.html
Australian Electronics Ring http://www.dontronics.com/aering.html
Win $500USD Cash. Micro design contest:  http://www.simmstick.com

1999\10\25@185116 by Tony Nixon

flavicon
picon face
Peter Keller wrote:
>
> Hi
> I am looking for some (5 - 10) PIC16F876-04 or -20/SP in DIL-Package.
> All distributor I know are sold out.
> Hardware is ready (without any microprocessor) and I have to start
> programming within a few days so I can deliver 5 prototypes until mid
> november.
> Any help ?
> Please send me an email privatly.
> Peter


I wonder if you could get away with a 16C7X-JW for the prototypes, then
shift to the flash parts when available.

--
Best regards

Tony

http://www.picnpoke.com
Email salesEraseMEspam.....picnpoke.com

1999\10\25@185529 by Erik Reikes

flavicon
face
At 07:02 AM 10/25/99 -0700, you wrote:
>Digikey is claiming to be getting more in December. I'd like
>to know what the hold up is on these Flash parts. It's
>been over a year since MicroChip started telling us about these
>parts!
>

The story I heard was that there is only one testing station capable of
testing the chips as they come off the line.  There is another one being
manufactured, but apparently these testing stations are very big ticket
limited production type devices and it takes a few months to have one
built.  All of the production coming out of the other tester is reserved
for the big dogs with high volume current production projects with these
micros.  I bought 25 of the 876's from digi-key when they had them and I am
using them all for first articles and pre-production samples.  I can only
hope that by mid-january they will be available in volume.  I may get bit,
I may not....

-Erik Reikes

1999\10\25@193829 by John C. Frenzel

picon face
>
> The story I heard was that there is only one testing station capable of
> testing the chips as they come off the line.  There is another one being
> manufactured, but apparently these testing stations are very big ticket
> limited production type devices and it takes a few months to have one
> built.

Erik,
Not only that, but the backlog for this equipment is enormous and growing.
John


__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

1999\10\26@011205 by Peter Keller

flavicon
face
Don
The pcb is already finished and I have some of them on my bench.
I should start programming now. A redesign of the pcb wiill delay me for 2 weeks
.

Does this prototype board include an 876 ?
Peter

Don McKenzie schrieb:

{Quote hidden}

1999\10\26@011404 by Peter Keller

flavicon
face
That means, they are almost handtest ,-) ?
Peter

Erik Reikes schrieb:

{Quote hidden}

1999\10\26@011413 by Peter Keller

flavicon
face
Tony
Good idea !
Peter

Tony Nixon schrieb:

{Quote hidden}

1999\10\26@024456 by Don McKenzie

flavicon
face
Peter Keller wrote:
>
> Don
> The pcb is already finished and I have some of them on my bench.
> I should start programming now. A redesign of the pcb wiill delay me for 2 wee
ks.
>
> Does this prototype board include an 876 ?
> Peter

Is that the funny thingo with the 28 legs on it?
Haven't seen one myself yet Peter!

Don McKenzie  RemoveMEdonspam_OUTspamKILLspamdontronics.com http://www.dontronics.com

Don's Download Dungeon:   http://www.dontronics.com/download.html
Australian Electronics Ring http://www.dontronics.com/aering.html
Win $500USD Cash. Micro design contest:  http://www.simmstick.com

1999\10\26@031820 by Peter Keller

flavicon
face
So did I ;-).
This dream of microprocessor will become a nightmare soon !
Peter

Don McKenzie schrieb:

> Peter Keller wrote:
> >
> > Don
> > The pcb is already finished and I have some of them on my bench.
> > I should start programming now. A redesign of the pcb wiill delay me for 2 w
eeks.
{Quote hidden}

1999\10\26@163146 by Andy Kunz

flavicon
face
>I wonder if you could get away with a 16C7X-JW for the prototypes, then
>shift to the flash parts when available.

I'm doing exactly that.  The only feature not implemented is use of the
internal EE, and codespace checksum on powerup to determine validity.

Andy

==================================================================
Eternity is only a heartbeat away - are you ready?  Ask me how!
------------------------------------------------------------------
EraseMEandyspamspamspamBeGonerc-hydros.com      http://www.rc-hydros.com     - Race Boats
RemoveMEandyKILLspamspammontanadesign.com  http://www.montanadesign.com - Electronics
==================================================================

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...