Post by thread:PIC programmers correction.

Just to correct the figure of $25USD quoted for the P16PRO software registration. Yes it has changed recently. It is now distributed via email and is $20USD for the software key. P16PRO Software Registration: You can Register P16PRO PICmicro software at DonTronics "on-line", using our web based secure Credit Card system for $20USD. The P16PRO software will work under DOS, W3.1 or W9x. This software will allow you to use most "David Tait" variant programmers to program a very large number of PICmicro devices via the Parallel Printer Port of a PC. Follow the registration link to read the full story. http://www.dontronics.com/p16pro.html This figure of $20USD is now quoted on the kitsrus.com home page and will be corrected on Bojan's page at: www.geocities.com/SiliconValley/Peaks/9620/ in the next few days. If you are programming a PIC16F84 or C84, then free software drivers are available from: http://www.dontronics.com/download.html These work with DOS, W9x, and NT. Don McKenzie spam_OUTdonTakeThisOuTdontronics.com http://www.dontronics.com Don's Download Dungeon: http://www.dontronics.com/download.html Australian Electronics Ring http://www.dontronics.com/aering.html