Searching \ for 'PIC programmers correction.' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=programmer
Search entire site for: 'PIC programmers correction.'.

Truncated match.
PICList Thread
'PIC programmers correction.'
1999\01\06@021918 by Don McKenzie

flavicon
face
Just to correct the figure of $25USD quoted for the P16PRO software
registration.
Yes it has changed recently. It is now distributed via email and is
$20USD for the software key.

P16PRO Software Registration:
You can Register P16PRO PICmicro software at DonTronics "on-line", using
our web based secure Credit Card system for $20USD. The P16PRO software
will work under DOS, W3.1 or W9x.
This software will allow you to use most "David Tait" variant
programmers to program a very large number of PICmicro devices via the
Parallel Printer Port of a PC. Follow the registration link to read the
full story.
http://www.dontronics.com/p16pro.html

This figure of $20USD is now quoted on the kitsrus.com home page and
will be corrected on Bojan's page at:
www.geocities.com/SiliconValley/Peaks/9620/
in the next few days.

If you are programming a PIC16F84 or C84, then free software drivers are
available from:
http://www.dontronics.com/download.html
These work with DOS, W9x, and NT.

Don McKenzie  spam_OUTdonTakeThisOuTspamdontronics.com http://www.dontronics.com

Don's Download Dungeon:   http://www.dontronics.com/download.html
Australian Electronics Ring http://www.dontronics.com/aering.html

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...