Searching \ for 'PCB Production - easy' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'PCB Production - easy'.

Truncated match.
PICList Thread
'PCB Production - easy'
1997\05\02@201523 by sdavidson

flavicon
face
Use apcircuits at

E-Mail: spam_OUTstaffTakeThisOuTspamapcircuits.com
WEB Page: http://www.apcircuits.com

You can download a free Easytrax PC Board design program, lay out a double
sided plated through board, FTP your gerber file and drill files to
apcircuits, then get the completed boards about a week later.  I got 6
3.5"x3.5" boards for around $100US.  A double sided plated-through board is a
much better board then a single sided board.  You get a stronger board with
better solder joints due to the plated-through, and you don't spend a couple
week-ends making your own single sided board.  Their Web site has all the info
you will need.

Steve

--- On Thu, 1 May 1997 15:34:38 +1000  Roger Melton <.....rmeltonKILLspamspam@spam@TPGI.COM.AU>
wrote:
Hi everyone,
Does anybody know any good low volume PCB manufacturers in Australia,
preferably someone who doesn't mind a few one off's without charging the
earth.
Must do double sided and via's.
Thanks in advance,
Roger Melton                            xx
rmeltonspamKILLspamtpgi.com.au         ^^^^^^^^^^^^<>^^^^^^^^^^^^
PO Box 701                             /  \
Tumut 2720 NSW                        O    0
Australia                          ____________


-----------------End of Original Message-----------------

-------------------------------------
E-mail: .....sdavidsonKILLspamspam.....its.bldrdoc.gov
Steven Davidson
Dept. of Comm.  NTIA-ITS.N2
325 Broadway
Boulder, CO  80303
W 303-497-3411  FAX 5995
-------------------------------------

1997\05\02@213332 by wft

face
flavicon
face
To: Steve Davidson

The reason I make my own boards is that I can turn the board including
layout in about 2 hours.  The quality is not high.  It verifies my
designs before I spent $$$ on the final professional output from
Advanced Circuits ( a very good prototyping house)
try    EraseMEsalesspam_OUTspamTakeThisOuTadvancedcircuits.com   (Denver, CO)

Gus Calabrese
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WFT Electronics    wftspamspam_OUTfrii.com   http://www.frii.com/~wft
Gus Calabrese      303 321-1119......voicemail
Lola Montes        1799 Uinta Street   Denver, CO 80220
EMERGENCY:   791 High Street     Estes Park, CO  80517
if no success with @spam@wftKILLspamspamfrii.com, try .... KILLspamwftKILLspamspambigfoot.com

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...