Post by thread:Off Topic - Build your own AVR AT90s programmer

Hi All, I notice someone mentioned before about AVR RISK MPU, just purchased two chips of AT90S1200 found it very nice like PIC 16C84, but the vendor of my universal programmer ALL-03A said that they stoped support it. So these days I built a very simple PC based programmer, very simple that it does NOT need a power supply(Powered by PC printer port). Works OK I think. I'd like to share my program freely with others, you can download the SCH &PCB and DOS program from my home page: http://www.qsl.net/ba1fb/fbprg.zip BTW, is there a AVR mailing list out there? Jerry Meng, BA1FB spam_OUTba1fbTakeThisOuTqsl.net http://www.qsl.net/ba1fb

Hi Jerry, > BTW, is there a AVR mailing list out there? There is an ATMEL mailing list available. There has been a lot of discussion about the AVR devices recently. The list covers all ATMEL semiconductor products but the new Flash micros are the top topic at the moment. The ATMEL list is now exactly 2 months old and has over 100 members. You can find out how to join by visiting the following URL : http://www.ip.co.za/people/kalle/atmel.htm Cheers -- Kalle Pihlajasaari .....kalleKILLspam@spam@ip.co.za http://www.ip.co.za/ip Interface Products P O Box 15775, DOORNFONTEIN, 2028, South Africa + 27 (11) 402-7750 Fax: 402-7751 http://www.ip.co.za/people/kalle DonTronics, Silicon Studio and Wirz Electronics uP Product Dealer Handheld and OEM Garmin GPS receivers