Searching \ for 'Membrane keypads and front panel vendors wanted' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=membrane+keypads
Search entire site for: 'Membrane keypads and front panel vendors wanted'.

Truncated match.
PICList Thread
'Membrane keypads and front panel vendors wanted'
1999\04\27@230947 by Norman Gillaspie

flavicon
face
I am hoping there are few of you out there that
have had some membrane front panel keypads made.

I am looking for vendors to supply a thin stick
on front panel assembly that has a keypad, cursor
arrows and a cutout for a 2 by 16 line LCD.

This panel would go a 1 rack unit high piece of equipment. I realize that it
would probably have to
be custom made.

I am looking for some sources and experiences.

Thanks

Norman

PCS Engineering
Norman Gillaspie
325M Sharon Park Dr. #210
Menlo park, Ca. 94025
Tel 650-854-5263
Fax 650-854-5445
Email spam_OUTnormanTakeThisOuTspampcseng.com

1999\04\28@104854 by Octavio Nogueira

flavicon
face
Did you ever try to quote this abroad? Sometimes this
things are cheaper here in Brazil than in US specially
at a dollar rate of US$1.00=R$1.70.
If you want I can quote it for you.

                         /"\
Friendly Regards          \ /
                          X  ASCII RIBBON CAMPAIGN
Octavio Nogueira          / \ AGAINST HTML MAIL
===================================================
.....nogueiraKILLspamspam@spam@propic2.com                  ICQ# 19841898
>From the creator of ProPic,ProPic 2 now much better
New ProPic 2  homepage:      http://www.propic2.com
PIC Programmer for Windows with down to earth price
===================================================
-----Mensagem Original-----
De: Norman Gillaspie <normanspamKILLspamPCSENG.COM>
Para: <.....PICLISTKILLspamspam.....MITVMA.MIT.EDU>
Enviada em: Quarta-feira, Abril 28, 1999 12:13
Assunto: Membrane keypads and front panel vendors wanted


> I am hoping there are few of you out there that
> have had some membrane front panel keypads made.
>
> I am looking for vendors to supply a thin stick
> on front panel assembly that has a keypad, cursor
> arrows and a cutout for a 2 by 16 line LCD.
>
> This panel would go a 1 rack unit high piece of equipment. I realize that
it
{Quote hidden}

1999\04\28@114054 by Reginald Neale

flavicon
face
>I am hoping there are few of you out there that
>have had some membrane front panel keypads made.
>
>I am looking for vendors to supply a thin stick
>on front panel assembly that has a keypad, cursor
>arrows and a cutout for a 2 by 16 line LCD.
>
Norman:

 We had a similar panel made and were pleased with this vendor:

   Duragraphix INC.
   320 N. Washington St.
   Rochester NY 14625
   716-586-0451

 We also had a presentation from:

   GM Nameplate
   10 Francestown Tpk.
   Mt. Vernon NH 03057
   603-673-9737

 Hope this is helpful.

 Reg Neale

1999\04\29@015532 by Norman Gillaspie

flavicon
face
Here is one other membrane switch source.

http://www.enl.com/index.htm

Does anyone have any more? What about bad experiences?

Norman


PCS Engineering
Norman Gillaspie
325M Sharon Park Dr. #210
Menlo park, Ca. 94025
Tel 650-854-5263
Fax 650-854-5445
Email normanspamspam_OUTpcseng.com


> {Original Message removed}

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...