Searching \ for 'Maxim Site' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=maxim+site
Search entire site for: 'Maxim Site'.

Truncated match.
PICList Thread
'Maxim Site'
1997\08\22@110509 by Andy Kunz

flavicon
face
Anybody able to get through to the Maxim site http://www.mxim.com recently?
I have been able to most of the week (only started trying on Tuesday).

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================

1997\08\22@115049 by Scott Walsh

flavicon
face
    I thought it was http://www.maxim-ic.com !


______________________________ Reply Separator _________________________________
Subject: Maxim Site
Author:  pic microcontroller discussion list <spam_OUTPICLISTTakeThisOuTspamMITVMA.MIT.EDU> at
INTERNET
Date:    22/08/97 11:03


Anybody able to get through to the Maxim site http://www.mxim.com recently?
I have been able to most of the week (only started trying on Tuesday).

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================

1997\08\22@121342 by Matt Bonner

flavicon
face
Scott Walsh wrote:
>
>      I thought it was http://www.maxim-ic.com !
>
> ______________________________ Reply Separator
_________________________________
> Subject: Maxim Site
> Author:  pic microcontroller discussion list <.....PICLISTKILLspamspam@spam@MITVMA.MIT.EDU> at
> INTERNET
> Date:    22/08/97 11:03
>
> Anybody able to get through to the Maxim site http://www.mxim.com recently?
>  I have been able to most of the week (only started trying on Tuesday).
>
> Andy
Scott's right: <http://www.maxim-ic.com/> works, but Andy's URL didn't
give me a "no dns" error, just said that it wasn't responding.  BTW,
http://www.maxim.com _did_ give a "no dns" error.
--Matt

1997\08\22@125036 by Mike

flavicon
face
At 11:03 AM 8/22/97 -0400, you wrote:
>Anybody able to get through to the Maxim site http://www.mxim.com recently?
> I have been able to most of the week (only started trying on Tuesday).

Hey Andy,

This is the link I use:-  http://www.maxim-ic.com/

Maybe the DNS is down (well not down under ;)

Rgds

Mike
Perth, Western Australia


Some say there is no magic but, all things begin with thought then it becomes
academic, then some poor slob works out a practical way to implement all that
theory, this is called Engineering - for most people another form of magic.
                                                                      Massen

1997\08\22@151537 by Philip Restuccia

flavicon
face
{Quote hidden}

Not only that, but a 'whois' on mxim.com works, and returns the record
for Maxim Integrated Products, while a 'whois' on maxim-ic.com fails to
turn up the same record.

       Philip Restuccia
       .....philip.restucciaKILLspamspam.....peri.com

1997\08\22@154605 by Andy Kunz

flavicon
face
>Not only that, but a 'whois' on mxim.com works, and returns the record
>for Maxim Integrated Products, while a 'whois' on maxim-ic.com fails to
>turn up the same record.

Well, boys, I guess that means there's a HUMAN somewhere on the 'net
screwing it up!

All you non-silicon internet terminals GET OFF NOW!

Who ever authorized non-silicon access to OUR network anyway?

Andy's Computer <G>


==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================

1997\08\22@195045 by Harold Hallikainen

picon face
On Fri, 22 Aug 1997 11:03:21 -0400 Andy Kunz <EraseMEmontanaspam_OUTspamTakeThisOuTFAST.NET> writes:
>Anybody able to get through to the Maxim site http://www.mxim.com
>recently?
> I have been able to most of the week (only started trying on
>Tuesday).
>


       Are they at http://www.maxim-ic.com  ?

Harold

1997\08\22@231157 by Tom Handley

picon face
  Andy, I was on their site yesterday to order a MAX3100 sample. It was
working fine.

  - Tom

At 11:03 AM 8/22/97 -0400, you wrote:
>Anybody able to get through to the Maxim site http://www.mxim.com recently?
> I have been able to most of the week (only started trying on Tuesday).
>
>Andy
>
>==================================================================
>Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
>          Hardware & Software for Industry & R/C Hobbies
>        "Go fast, turn right, and keep the wet side down!"
>==================================================================

1997\08\23@155134 by Andy Kunz

flavicon
face
At 08:09 PM 8/22/97 -0700, you wrote:
>   Andy, I was on their site yesterday to order a MAX3100 sample. It was
>working fine.

I got through later on the new address.  Thanks.

Andy


==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================

1997\08\25@153445 by Ian Raymond Douglas

flavicon
face
Maxim's site was http://www.mxim.com before they added the other one,
http://www.maxim-ic.com

On Mon, 4 Aug 1997, Matt Bonner wrote:

{Quote hidden}

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...