'MPLINK error reporting in MPLAB'
I am using MPLAB v4.12 and get no error reporting from MPLINK in the
MPLAB window. I do get reporting of errors from MPASM.
Figure 4.44 in the MPLAB IDE, SIMULATOR, EDITOR USERS GUIDE (document
DS51025B) shows the output I expect to get. All i see is Build completed
successfully or Build failed. If build failed and I run the same command
manually in an MSDOS window then I see the cause of the error.
Is there a way to get MPLAB to show the full output from the linker?
More... (looser matching)
- Last day of these posts
- In 1999
, 2000 only
- New search...