Searching \ for 'MPLAB OR Coding problem' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page:
Search entire site for: 'MPLAB OR Coding problem'.

Truncated match.
PICList Thread
'MPLAB OR Coding problem'
1998\12\12@135515 by Paul Phillips

picon face
part 0 325 bytes content-type:application/octet-stream; (decoded 7bit)


Content-Type: application/octet-stream;
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;

Attachment converted: wonderland:password.asm (????/----) (00021393)

1998\12\13@142009 by uter van ooijen / floortje hanneman

picon face
Just a few hints:

Does your target hardware work?
-> 5V available
-> reset (mclr) pin tied to + via a R
-> xtal connected, 2 caps

Now download a simple hex file (blink-a-led) from somewhere on the web and
get that working.

Is the configuration specified correctly (either in the asm source or in
the programmer software)?
-> correct setting for your xtal (XT will generally work)
-> power-up timer enabled, but this is not very important

Is your program really correct?
-> did you make the output pins output (tris instruction)?


> From: Paul Phillips <.....paulKILLspamspam@spam@COLINDALE.DEMON.CO.UK>
> Subject: MPLAB OR Coding problem
> Date: Saturday, December 12, 1998 01:52
> Hi there, i'm using MPLAB version 4.00, the code that I have written,
> to work ok, but when I download the program to the 16F84, nothing
> just like a blank PIC, any ideas ?
> Paul.P

More... (looser matching)
- Last day of these posts
- In 1998 , 1999 only
- Today
- New search...