Truncated match.
PICList
Thread
'MPLAB 3.22 bug (?)'
1997\05\29@202349
by
L055132
I've just started using MPLAB 3.22. I'm having problems with creating
and opening projects. Whenever I open a project (project file created
with 3.22), the primary file is not automatically opened for editing and
I get a dialog box telling me "Error Opening HEX File".
Anyone having similar problems or is it just that I should RTFM?
Thanks in advance folks.
Frank Richterkessing
Experimental Methods Engineer
GE Appliances
spam_OUTFRANK.RICHTERKESSINGTakeThisOuT
APPL.GE.COM
"The secret to good housekeeping -- Use low wattage bulbs!"
1997\05\30@024329
by
Lars Johansson 6018384
ÈI've just started using MPLAB 3.22. I'm having problems with creating
Èand opening projects. Whenever I open a project (project file created
Èwith 3.22), the primary file is not automatically opened for editing and
ÈI get a dialog box telling me "Error Opening HEX File".
In MPLAB: Projekt>Add/Modify Compiler
Hex File
INHX8M /ainhx8m
INHX8S /ainhx8s
INHX32 /ainhx32
Write this, and it will work.
Good Luck
//Lars Johansson Stockholm, Sweden
1997\05\30@113102
by
Tim Crist
I was receiving the same error until I relocated my *.asm to the MPASM
directory where MPLAB executable resides. Since then, no problems.
Hope that helps...
Tim Crist
>I've just started using MPLAB 3.22. I'm having problems with creating
>and opening projects. Whenever I open a project (project file created
>with 3.22), the primary file is not automatically opened for editing
>and
>I get a dialog box telling me "Error Opening HEX File".
>Frank Richterkessing
'MPLAB 3.22 bug (?)'
1997\06\02@145215
by
Steve Smith
If you reassemble and resave the problem goes away. It happened to me also.
Steve.....
1997\06\02@164029
by
Mel Evans
I missed the start of this. What was the problem?
-- Mel Evans
More... (looser matching)
- Last day of these posts
- In 1997
, 1998 only
- Today
- New search...