'Looking for a Low-Cost Bare Board Supplier'
I'm wondering if anybody can point me towards a good, low cost bare board
The board that I have is 3" square and has copper on the backside only.
Three drills are required and silkscreen on the topside. No solder mask.
Quantities are 3K initially and 2K periodically with a 4-5 week leadtime.
If you know of anybody, please pass the specifications above to them and
have them contact me.
www.apcircuits.com is the best I know of for smaller quantities. Don't know
on larger quantities, but at least check with them.
Myke Predko wrote:
More... (looser matching)
- Last day of these posts
- In 2000
, 2001 only
- New search...