Searching \ for 'Job offer: Write PC PIC-programming software for c' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=programming
Search entire site for: 'Job offer: Write PC PIC-programming software for c'.

Truncated match.
PICList Thread
'Job offer: Write PC PIC-programming software for c'
1997\06\01@163713 by Glenn Johansson

flavicon
face
I need someone to write a relatively simple PIC16c84/24C16-programming
utility that allows programming via a very simple programmer connected to a
PC parallel port.

If anyone reading this is able to spare some time, I will mail you the
special details, so you can get back to me regarding how much money you
want in compensation for writing the desired program.

Anyone (but preferably in Europe) who believes they posess the knowledge
required and has some time to spare, please contact me now! I will pay what
it costs.

Glenn Johansson
Sell Them
Sweden

1997\06\01@172807 by Eric Martens

flavicon
face
Hold your horses !!!!!!

I can help you and it won't cost you anything more then a poststamp to mail the
schematic
to you !!!!
I have a schematic over here wich you can use for a pic16C84 and for a 24C02.
change the
pinning and you can use it for a 24C16. The programmer is connected to the COM
port. It
doesn't need a power supply, the power supply is provided by the COM port. The
whole
programmer for the pic consist of just 3 resistors, 3 zener diodes, 1 diode, one
78L05,
one 22uF capacitor, one 100nF capacitor, a 18 pin dil connector and a 9pins D
connector.
The programmer for the eproms uses even less components.

By the way you give me creeps. just now when i read your email, I just finished
building
this programmer myself !!!!!

The software you need, you can get it for free on the internet !!!! and it's
very simple
to use.

Let me know if your interested ( i Think you will).

Greetings Eric Martens

***************************
*  Eric Martens           *
*  spam_OUTemarTakeThisOuTspamknoware.nl  *
**************************

PS: If there is anybody more that is interested, let me know.


----------
| From: Glenn Johansson <.....glennKILLspamspam@spam@WRITEME.COM>
| To: PICLISTspamKILLspamMITVMA.MIT.EDU
| Subject: Job offer: Write PC PIC-programming software for cash!
| Date: zondag 1 juni 1997 22:10
|
| I need someone to write a relatively simple PIC16c84/24C16-programming
| utility that allows programming via a very simple programmer connected to a
| PC parallel port.
|
| If anyone reading this is able to spare some time, I will mail you the
| special details, so you can get back to me regarding how much money you
| want in compensation for writing the desired program.
|
| Anyone (but preferably in Europe) who believes they posess the knowledge
| required and has some time to spare, please contact me now! I will pay what
| it costs.
|
| Glenn Johansson
| Sell Them
| Sweden

1997\06\01@175821 by Eric Martens

flavicon
face
Hold your horses !!!!!!

I can help you and it won't cost you anything more then a poststamp to mail the
schematic
to you !!!!
have a schematic over here wich you can use for a pic16C84 and for a 24C02.
change the
pinning and you can use it for a 24C16.

*****************
It's even simpler, you don't even need to change the pinning. Just place the
24C16 in the
socket and select a different eprom in the programming software and voila that
is all. No
rewiring needed.

*****************

The programmer is connected to the COM port. It
doesn't need a power supply, the power supply is provided by the COM port. The
whole
programmer for the pic consist of just 3 resistors, 3 zener diodes, 1 diode, one
78L05,
one 22uF capacitor, one 100nF capacitor, a 18 pin dil connector and a 9pins D
connector.
The programmer for the eproms uses even less components.

By the way you give me creeps. just now when i read your email, I just finished
building
this programmer myself !!!!!

The software you need, you can get it for free on the internet !!!! and it's
very simple
to use.

Let me know if your interested ( i Think you will).

Greetings Eric Martens

***************************
*  Eric Martens           *
*  .....emarKILLspamspam.....knoware.nl  *
**************************

PS: If there is anybody more that is interested, let me know.


----------
| From: Glenn Johansson <EraseMEglennspam_OUTspamTakeThisOuTWRITEME.COM>
| To: PICLISTspamspam_OUTMITVMA.MIT.EDU
| Subject: Job offer: Write PC PIC-programming software for cash!
| Date: zondag 1 juni 1997 22:10
|
| I need someone to write a relatively simple PIC16c84/24C16-programming
| utility that allows programming via a very simple programmer connected to a
| PC parallel port.
|
| If anyone reading this is able to spare some time, I will mail you the
| special details, so you can get back to me regarding how much money you
| want in compensation for writing the desired program.
|
| Anyone (but preferably in Europe) who believes they posess the knowledge
| required and has some time to spare, please contact me now! I will pay what
| it costs.
|
| Glenn Johansson
| Sell Them
| Sweden

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...