Searching \ for 'Interruots' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page:
Search entire site for: 'Interruots'.

Truncated match.
PICList Thread
1999\03\18@105732 by Prashanth Ram

Hi there.
       Hello.. Can you disable interrupts when another interruput is
being serviced? Meaning, on my system, port B interrupt needs to be
disabled when the receive interrupt is being serviced. Port B
interrupt should, however always be set up.
Thanks ..

1999\03\18@110558 by Holger Morgen

Hi -

As far as I remember the GIE (Global Interupt Enable) is cleared when you
get an interupt. RETI then
sets it back.
So to answer your Q: it's done automatecly.


{Quote hidden}

1999\03\18@120244 by Andy Kunz

>get an interupt. RETI then

retfie is the correct opcode.

The various interrupts can be disabled selectively in PIEx


   \     /---\     /
    \    |   |    /          Andy Kunz
     \   /---\   /           Montana Design
/---------+   +---------\
| /  |----|___|----|  \ |
\/___|      *      |___\/     Go fast, turn right,
                              and keep the wet side down!

1999\03\18@140258 by Sean Breheny

face picon face
At 11:29 AM 3/18/99 -0500, you wrote:
>>get an interupt. RETI then
>retfie is the correct opcode.

Yes,in Mchip mnemonics,but isn't RETI the parallax mnemonic? It definately
is what is used by the SX-Key software for the Scenix chips.


| Sean Breheny
| Amateur Radio Callsign: KA3YXM
| Electrical Engineering Student
Save lives, please look at
Personal page: ICQ #: 3329174

1999\03\18@145051 by Tom Handley

picon face
  Sean, "RETI" is Parallax syntax which is also used in their SX software.
For anyone familiar with Parallax/CVASM/805x syntax, the transition to SX is

  - Tom

At 02:00 PM 3/18/99 -0500, Sean Breheny wrote:
{Quote hidden}

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...