Searching \ for 'Hyperterminal' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=hyperterminal
Search entire site for: 'Hyperterminal'.

Truncated match.
PICList Thread
'Hyperterminal'
1997\06\24@223442 by trogers

flavicon
face
David BALDWIN wrote:

> Does somebody knows how to configure and use Hyperterminal from Win95
> to
> use with PICS and receive/send data to RS232 line?

David:

Set up a new Hyperterminal session. Put in any phone number, but don't
connect. Go to the File:Properties selection and set the Connect Using
drop down list to your correct com port. Click on Configure and set the
baud & bit stuff to match the com routines you programmed into your PIC
(Whoops! You did do that first..)

Now the undocumented trick. Several (not all) of the changes you can
make in the Configure menu don't take effect until you exit and restart
the hyperterminal session. I can never remember which ('cause I don't
use it, really, except to tell customers how to check our equipment is
connected) so I always just exit and restart when I make any change.

You probably want to turn off the hardware handshaking unless you've
wired your project for it.

Good luck --Tom Rogers  VP-R&D  Time Tech Inc.

1997\06\25@171321 by Kieran Sullivan

flavicon
face
part 0 342 bytes
Hope this answers your question.

Kieran


----------
From:   David BALDWIN[SMTP:spam_OUTbaldwinTakeThisOuTspamETCA.ALCATEL.BE]
Sent:   24 June 1997 14:32
To:     .....PICLISTKILLspamspam@spam@MITVMA.MIT.EDU
Subject:        Hyperterminal

Does somebody knows how to configure and use Hyperterminal from Win95 to
use with PICS and receive/send data to RS232 line? thanks a lot.

David


More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...