Searching \ for 'PicBasic Pro with MPLAB??' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/languages.htm?key=mplab
Search entire site for: 'PicBasic Pro with MPLAB??'.

Truncated match.
PICList Thread
'PicBasic Pro with MPLAB??'
1998\10\01@212735 by Gabriel Gonzalez

flavicon
face
Hi,

I just received my PBP compiler today, and I installed it to MPLAB 3.99.06
as indicated in the READ.ME file.

Everything to be OK until I hit BUILD. With the blink example I get the
following error:

>
Building BLINK.HEX...

Compiling BLINK.BAS:
Command line: "C:\PB-PRO\PBP.EXE -ampasm -oq -p16C63
C:\PB-PRO\SAMPLES\BLINK.BAS"
PicBasic Pro Compiler 2.10,  Copyright (c) 1998 microEngineering Labs, Inc.
All Rights Reserved.

MPLAB is unable to find output file "BLINK.HEX".

Build failed.
<

I don't know what I am doing wrong, would you help me???
I'm sure it must be something real easy, but I can't find out what...


TIA

Gabriel Gonzalez
TGO Electronics
(915)855-3018

1998\10\02@063310 by g.daniel.invent.design

flavicon
face
Gabriel,
I would expect that there is a BLINK.ERR file, open this and find the
errors, if it's like MPASM then your output message "can not find *.hex"
meand that build failed due to an error during program compilation.
regards,
Graham Daniel.


Gabriel Gonzalez wrote:
{Quote hidden}

1998\10\02@151110 by chuck

flavicon
face
MPASM produces a .err file that may offer a clue.
Check that for your blink file (blink.err).

MPLAB can't find blink.hex because it didn't build correctly. I had
the same problem the first time I installed PBPro in MPLAB. I kept
getting a
P16F84.INC file not found error.
I changed the DOS path to include MPLAB where the P.inc files are
located. It still didn't work.
I finally copied all the P.inc files to the PBP directory and
everything worked correctly.
Try just copying the P16C63.inc file to the PBP directory and see if
that works.

Chuck

---Gabriel Gonzalez <spam_OUTtgoTakeThisOuTspamCHIH1.TELMEX.NET.MX> wrote:
>
> Hi,
>
> I just received my PBP compiler today, and I installed it to MPLAB
3.99.06
> as indicated in the READ.ME file.
>
> Everything to be OK until I hit BUILD. With the blink example I get
the
> following error:
>
> >
> Building BLINK.HEX...
>
> Compiling BLINK.BAS:
> Command line: "C:\PB-PRO\PBP.EXE -ampasm -oq -p16C63
> C:\PB-PRO\SAMPLES\BLINK.BAS"
> PicBasic Pro Compiler 2.10,  Copyright (c) 1998 microEngineering
Labs, Inc.
{Quote hidden}

==
Chuck Hellebuyck
Electronic Products
Check out our Large Character Serial LCD Modules!
See our new Serial Keypad Modules!
http://elproducts.com
.....chuckKILLspamspam@spam@elproducts.com

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com

More... (looser matching)
- Last day of these posts
- In 1998 , 1999 only
- Today
- New search...