Post by thread:Fw: MPLAB OR Coding problem

part 0 325 bytes content-type:application/octet-stream; (decoded 7bit) Paul.P spam_OUTPICTakeThisOuTColindale.demon.co.uk Content-Type: application/octet-stream; name="password.asm" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="password.asm" Attachment converted: wonderland:password.asm (????/----) (00021393)

Just a few hints: Does your target hardware work? -> 5V available -> reset (mclr) pin tied to + via a R -> xtal connected, 2 caps Now download a simple hex file (blink-a-led) from somewhere on the web and get that working. Is the configuration specified correctly (either in the asm source or in the programmer software)? -> correct setting for your xtal (XT will generally work) -> WATCHDOG DISABLED!!!!!! -> power-up timer enabled, but this is not very important Is your program really correct? -> did you make the output pins output (tris instruction)? success, Wouter. ---------- > From: Paul Phillips <.....paulKILLspam@spam@COLINDALE.DEMON.CO.UK> > To: PICLISTKILLspamMITVMA.MIT.EDU > Subject: MPLAB OR Coding problem > Date: Saturday, December 12, 1998 01:52 > > Hi there, i'm using MPLAB version 4.00, the code that I have written, seems > to work ok, but when I download the program to the 16F84, nothing happens, > just like a blank PIC, any ideas ? > > Paul.P > .....PICKILLspam.....Colindale.demon.co.uk > >