Raul Sulla Torres
Where I can get information to build an arm robot controlled with the PIC
And if this in the WEB which is their address
Is this a hobby arm or something more serious?
Take a look at http://22.214.171.124/robots/arm.html. If you want to
control it with a PIC, then you can use the serial servo controller at
http://126.96.36.199/robots/ssc1684.html. I used it to run the arm and it
worked just like it should. However this arm is really just a toy - it only
has about 2-3 ounces of lift.
Something more serious:
I would be interested in something more serious myself. The above arm cost
quite a bit to build and it still isn't really useful for work. If the
price could be kept under a few hundred for something in the 16 ounce lift
category with five to six axis of motion (6 preferred), I would be
From: Raul Sulla Torres <UCSM.EDU.PE> rsullato
To: MITVMA.MIT.EDU < PICLISTMITVMA.MIT.EDU> PICLIST
Date: Sunday, August 29, 1999 6:10 AM
More... (looser matching)
- Last day of these posts
- In 1999
, 2000 only
- New search...