Searching \ for '[PICS] SuperCAD Symbol' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devices.htm?key=pic
Search entire site for: 'SuperCAD Symbol'.

No exact or substring matches. trying for part
PICList Thread
'SuperCAD Symbol'
1997\02\25@102203 by Andy Kunz

flavicon
face
Does anyone out there have a SuperCAD symbol (http://www.mentala.com) for
the PIC16C74 chip?

Anybody but me using SuperCAD?

Thanks.

Andy
==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================

1997\02\28@013717 by Troy Powledge

flavicon
face
I just purchased SuperPCB and am about to install it. Have you heard anything
about it. Either good or bad.

~*~*~*~*~*~*
Troy Powledge
TCo. Systems
spam_OUTtpowTakeThisOuTspameramp.net
*~*~*~*~*~*~

{Quote hidden}

- To subscribe -or- unsubscribe send e-mail to majordomospamKILLspamparallaxinc.com and
- put SUBSCRIBE pics -or- UNSUBSCRIBE pics in the body of the message

1997\02\28@023309 by David W. Duley

picon face
In a message dated 97-02-28 01:37:50 EST, you write:

<<
I just purchased SuperPCB and am about to install it. Have you heard
anything
 about it. Either good or bad.

~*~*~*~*~*~*
Troy Powledge
TCo. Systems
.....tpowKILLspamspam.....eramp.net
*~*~*~*~*~*~
 >>
Troy,
I use both SuperPCB and SuperCad.  I am happy.  Library parts are easy to
create (once you figure it out).  I have found a few quirks but you won't
find any of the big packages that don't have some bugs.  They have been very
responsive to my gripes and they even sent me a fix via Email.  I got the Pro
package which has everything except the circuit simulator.  I do mostly
digital CPU type stuff.  Simulators don't work too well for micro processors.

out of 5 stars I would give it 3 1/2.
It is a perfect package for low end to moderate use.  I have made six layer
boards with out any problem.  The gerber file generation all seems to work
OK. My final films come out great.

Hope this reasures you
Dave Duley
V.P. DreiTek Inc.

1997\02\28@093703 by Andy Kunz

flavicon
face
At 01:34 AM 2/27/97 -0600, you wrote:
>I just purchased SuperPCB and am about to install it. Have you heard anything
> about it. Either good or bad.

I like it.  The SuperCAD is not fully understood in my cranium yet, and I
hear that the design rule checker and some other utilities are a bit weak.

I've used the PCB package for about a year and am rather pleased.  It isn't
as fancy as HiWire, but it gets the job done.

Andy
==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================


'SuperCAD Symbol'
1997\03\12@024832 by Ing. Pablo Otero
flavicon
face
At 10:20 AM 25/02/97 -0500, you wrote:
>Does anyone out there have a SuperCAD symbol (http://www.mentala.com) for
>the PIC16C74 chip?
>
>Anybody but me using SuperCAD?

Andy:

I do use it but not a lot, i did prefer the dos version but now i have to use
the windows version, by the way i dont have the '74 symbol.  It's not that hard
to make it. Isn't it?

See you!

Pablo.

{Quote hidden}

_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/                                                              _/
_/                   N  A  F    Electronic                      _/
_/                       M e x i c o                            _/
_/                                                              _/
_/             e-mail: EraseMEnafpocspam_OUTspamTakeThisOuTmail.giga.com                     _/
_/                                                              _/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

1997\03\12@100951 by Andy Kunz

flavicon
face
> I do use it but not a lot, i did prefer the dos version but now i have to
use
>the windows version, by the way i dont have the '74 symbol.  It's not that
hard
>to make it. Isn't it?

Thanks, Pablo.  Haven't heard from you much recently.

Prefer DOS, eh?  I just upgraded to PCB v1.8 for Windows and the
corresponding CAD version.  Very nice.

It isn't hard to make, I just didn't have time.  And people were kind
enough to provide what I needed.

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...