Searching \ for 'FUSES' in subject line. ()
Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=fuses
Search entire site for: 'FUSES'.

Truncated match.
PICList Thread
'FUSES'
1998\06\25@204607 by WF AUTOMACAO

1999\07\20@020752 by Nigel Goodwin

In message <spam_OUT37931FEB.9BDA8276TakeThisOuTultra.net.au>, Howard <.....brahKILLspam@spam@ULTRA.NET.AU>
writes
>I had a bit of a crash, and had to reload Nigel Goodwin's wpicprog2.
>I'm using DonTronic's DT001 with a DT101 and Mplab's editor.
>I now notice, (which I'm sure didn't appear before) at the end of the
>programming action, there is a very, very, brief message "Blowing fuses
>to 0x11"
>It then displays the time taken, as usual, and exits, as usual, and the
>programmed PIC seems to work OK.  "Seems" being the operative word!  Is
>there a problem lurking therewithin, just waiting to bite me down the
>track?
>Suggestions would be appreciated, as would a pointer to information on
>the subject of fuses, which has now been brought to my attention.

Hi Howard,

My program always sets the fuses (as I'm sure almost all other programs
do), if you don't actually alter them yourself my software uses internal
default values. The fuses basically set the type of oscillator to be
used , the 'power up timer', code protection bits, and probably a few
more - I've just got back from the pub and the brains a bit poor:-).
--

Nigel.

       /--------------------------------------------------------------\
       | Nigel Goodwin   | Internet : nigelgKILLspamlpilsley.demon.co.uk     |
       | Lower Pilsley   | Web Page : http://www.lpilsley.demon.co.uk |
       | Chesterfield    | Official site for Shin Ki and New Spirit   |
       | England         |                 Ju Jitsu                   |
       \--------------------------------------------------------------/

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...