Post by thread:Connector Dimensions

Greetings, I am trying to lay out a board using Easytrax and need to support a modular telephone connector. Designing a new part seems to be straight forward, but I need to find a document that describes the connector dimensions in sufficient detail. Is there an online reference for the dimensions of AMP connectors ??? Any pointers would be greatly appreciated.... Bob Segrest

AMP sent me a CD-ROM with parts descriptions on it. If you can't dind the dimensions elsewhere, e-mail me Gus Bob Segrest wrote: {Quote hidden}> > Greetings, > > I am trying to lay out a board using Easytrax and need to support a modular > telephone connector. Designing a new part seems to be straight forward, > but I need to find a document that describes the connector dimensions in > sufficient detail. > > Is there an online reference for the dimensions of AMP connectors ??? > > Any pointers would be greatly appreciated.... > > Bob Segrest -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ WFT Electronics spam_OUTwftTakeThisOuTfrii.com http://www.frii.com/~wft Gus Calabrese 303 321-1119......voicemail Lola Montes 1799 Uinta Street Denver, CO 80220 EMERGENCY: 791 High Street Estes Park, CO 80517 if no success with .....wftKILLspam@spam@frii.com, try .... wftKILLspambigfoot.com

Bob Segrest wrote: > Is there an online reference for the dimensions of AMP connectors ??? > Any pointers would be greatly appreciated.... Bob, Try the following Web address: http://connect.amp.com This is their on-line catalog with search facilities, part numbers, and drawings. Good luck. - John Maud

If you can follow this, these are the dimensions I have from my library... 6 Way Telskt Dimensions in inches. Design with 25mil grid Pad size is 0.1 round with 32mil holes On Top Overlay Draw a rectangle 0.8(L) X 0.5(H). Pads are in two vertical rows 1st row is 0.05 from right edge Pad 1 is 0.375 from bottom, Pad3 - 0.275, Pad5 - 0.175 2nd row is 0.15 from right edge Pad 2 is 0.325 from bottom, Pad4 - 0.225, Pad6 - 0.125 Regards Tony Just when I thought I knew it all, I learned that I didn't.

Bob, Look in Digikey's Catalog. If you don't have one let me know and I will send you a scan of the relevant page. Carl Watley {Quote hidden}>modular >telephone connector. Designing a new part seems to be straight >forward, >but I need to find a document that describes the connector dimensions >in >sufficient detail. > >Is there an online reference for the dimensions of AMP connectors ??? > >Any pointers would be greatly appreciated.... > >Bob Segrest >

Carl Watley wrote: > > Bob, > > Look in Digikey's Catalog. If you don't have one let me know and > I will send you a scan of the relevant page. > FYI, all digikey pages are available in PDV format at http://www.digikey.com You can find a picture of the spec. there... -- Daniel Holt - Genetronics Inc. .....dholtKILLspam.....genetronics.com http://www.genetronics.com http://rohan.sdsu.edu/home/holt/index.html