Truncated match.
PICList
Thread
'Combining Microchip and Parallax Source Code'
1997\05\27@111953
by
Ted Linn
|
I have obtained a program from the Parallax Web Site called picsrc12. It is
supposed to take INHX8M output from Parallax pasm and convert it to
Microchip mpasm source and vice versa. The code is for a 16c57. Converting
from mpasm to pasm seems to work, as long as the origin is zero. The lables
for jumps and calls are not present if the origin is not zero. Going from
pasm to mpasm creates a file that at the least is not formatted properly for
mpasm as below:
00015 ; include "picreg.h"
00016
Warning[207]: Found label after column 1. (INDIRECT)
00000000 00017 INDIRECT equ H'00'
Warning[207]: Found label after column 1. (FILE_08)
00000008 00018 FILE_08 equ H'08'
Warning[207]: Found label after column 1. (FILE_09)
00000009 00019 FILE_09 equ H'09'
Also I don't know where to get the picreg.h file.
Does anyone have any experience combining code written with these two
assemblers using picsrc12 or any other method?
Thanks in advance.
Ted
1997\05\27@150747
by
Ted Linn
I have obtained a program from the Parallax Web Site called picsrc12. It is
supposed to take INHX8M output from Parallax pasm and convert it to
Microchip mpasm source and vice versa. The code is for a 16c57. Converting
from mpasm to pasm seems to work, as long as the origin is zero. The lables
for jumps and calls are not present if the origin is not zero. Going from
pasm to mpasm seems like it might work if I could find the include file
picreg.h.
Does anyone have any experience combining code written with these two
assemblers using picsrc12 or any other method?
Thanks in advance.
Ted
More... (looser matching)
- Last day of these posts
- In 1997
, 1998 only
- Today
- New search...