Searching \ for 'A BIG THANK YOU' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=big+thank+you
Search entire site for: 'A BIG THANK YOU'.

Truncated match.
PICList Thread
'A BIG THANK YOU'
1998\06\02@180800 by Steven Kosmerchock

flavicon
face
To everybody that helped me with some info on my question,
IThank all of you so much. I appreciate your effort and thanks to the advice I
received from  you,  I completed the preliminaries of  my project. The people on
the PICList sure are a great bunch of people.
                       Best regards to all,
                       Steven


********************************************
Steven Kosmerchock
Engineering Technician
CELWAVE
Phoenix    Arizona    USA
email:   spam_OUTsteve.kosmerchockTakeThisOuTspamcelwave.com
********************************************
www.geocities.com/researchtriangle/lab/6584
*******************************************




---- PICLIST(a)MITVMA.MIT.EDU's Message ----

well if the processor isn't doing anything else, you could just sit in a
software loop. well if the processor isn't doing anything else, you could
just sit in a software loop. well if the processor isn't doing anything
else, you could just sit in a software loop. well if the processor isn't
doing anything else, you could just sit in a software loop.

see how much time is used in the loop. (sorry....lol)

first calculate the number of clock cycles executed in 31 minutes. (assumes
you are using 4Mhz xtal)

31 mins * (60 secs / 1 min) * ( 4,000,000 clocks / sec ) * ( 1 cycle / 4
clocks )

   movlw    30
   movwf    counter1
   movlw    40
   movwf    counter2
   movlw    50
   movwf    counter3

loop1    decfsz    counter3,f    ; uses 1 clock cycle
       goto    loop        ; uses 2 clock cycles
       decfsz    counter2,f
       goto    loop
       decfsz    counter1,f
       goto    loop
       nop        ; will end up here in awhile

note: the inital values of counter1 2 and 3 are not correct, as the student
it's your task to figure out the correct values.

hint: try to get the loop to execute for 1 minute while testing, waiting for
35 minutes to see if your code is working might take along time to debug.

michael

{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 1998 , 1999 only
- Today
- New search...