Searching \ for '2400 speed connection using1684' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devices.htm?key=684
Search entire site for: '2400 speed connection using1684'.

Truncated match.
PICList Thread
'2400 speed connection using1684'
1998\06\18@125148 by Husni Hammoud

flavicon
face
I'm new to this I would like to get a routine to control one of the 1684 port as
to send data to LCD display using serial link at 2400bps. I'm using pic16c84 at
4mhz with lcd 1x16 from Scott Edwards.
This is the Basic Command to initialize the comm port.
Writen in Qbasic:
OPEN "COM1:2400,N,8,1,CD0,CS0,DS0" FOR OUTPUT AS #1

Your help is highly appreciated.

Husni


-----== Sent via Deja News, The Discussion Network ==-----
http://www.dejanews.com/  Easy access to 50,000+ discussion forums

1998\06\23@125919 by Todd Peterson

flavicon
face
>I'm new to this I would like to get a routine to control one of the 1684
port as to send data to LCD display using serial link at 2400bps. I'm using
pic16c84 at 4mhz with lcd 1x16 from Scott Edwards.
>This is the Basic Command to initialize the comm port.
>Writen in Qbasic:
>OPEN "COM1:2400,N,8,1,CD0,CS0,DS0" FOR OUTPUT AS #1

Take a look at the QBASIC software in our EDE702 LCD Screen Controller IC
datasheet.  Note the subroutine at the bottom of the code.  It of course
works with our screen controller IC's, and should work with Scott's.  Also,
please note that the QBASIC code in the datasheet for our newer EDE702
works without a delay loop, as is used in the EDE700 QBASIC code.

-Todd Peterson
E-Lab Digital Engineering, Inc.
(816) 257-9954


http://www.elabinc.com

More... (looser matching)
- Last day of these posts
- In 1998 , 1999 only
- Today
- New search...