Searching \ for '2 Serial ports?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/io/serials.htm?key=serial
Search entire site for: '2 Serial ports?'.

Truncated match.
PICList Thread
'2 Serial ports?'
2004\10\19@125503 by Padu

face picon face
Dear Gurus,

I'm designing an application using a PIC16F877A that communicates with another component (a gps module) through two serial pins (Rx/Tx). What I would like to do is receive gps messages in the PIC, do some processing and output them to a MAX232 that will connect to a PC.

Having said that, I have two questions that are intriguing me:

1) In the PIC datasheet, I only see RC6 and RC7 as serial ports. In this application, I will need two ports, one to communicate with the GPS module and another to communicate with the PC through a COM port. How can that be done?

2) The GPS serial port operates at 1.8V levels. Can I still connect it pin-to-pin with the PIC or do I need a level shifter in between? What is the voltage used in serial communication by the PIC16F877A? I tried to look at the PIC datasheet but I got even more confused.

Help please

Cheers

Padu
___________________________________________

2004\10\19@153336 by Peter Moreton

flavicon
face
Padu,

You can bit-bang the second serial port using routines freely available on
the web. (Alternatively, select a PIC with two USART modules!) You will need
to level shift the PIC pins to 1.8v for your GPS - are you sure the
interface is 1.8?, if it is say 3.3v logic then you can use a PIC 'LF' part
that will run at 3.3v, and do away with level translation.

Peter Moreton


> {Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2004 , 2005 only
- Today
- New search...