Post by thread:'nuther FET question

> OK...still playin with FET's, have a bunch on order to actually test > with. P channel devices seem to be rated in negative current, why is > that? Because the current flows the other way around from an N channel FET. > And the gate voltage, rated as a negative voltage. If I look at the > specs, Vgs is say rated at -10V, is that implying that the gate will > turn on if the voltage on the gate is 10 volts below that of the source > pin? Yes. ***************************************************************** Embed Inc, embedded system specialists in Littleton Massachusetts (978) 742-9014, http://www.embedinc.com -- http://www.piclist.com hint: To leave the PICList spam_OUTpiclist-unsubscribe-requestTakeThisOuTmitvma.mit.edu>