Searching \ for '] Where to buy chip carrier tubes?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=
Search entire site for: 'Where to buy chip carrier tubes?'.

Truncated match.
PICList Thread
'] Where to buy chip carrier tubes?'
2004\07\08@235347 by Wouter van Ooijen

face picon face
> Just the standard transport tubes that chips are sold in. I
> need some is
> various sizes, any idea where I can buy some?

How many do you need, and which sizes? I have some, but you'll have to
pay the postage (I'm in the Netherlands)

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: http://www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email spam_OUTlistservTakeThisOuTspammitvma.mit.edu with SET PICList DIGEST in the body

2004\07\09@012249 by Matthew Brush

flavicon
face
> Just the standard transport tubes that chips are
> sold in. I
> > need some is
> > various sizes, any idea where I can buy some?
>
> How many do you need, and which sizes? I have some,
> but you'll have to
> pay the postage (I'm in the Netherlands)

Same here, I have a plastic grocery bag full of them
from samples I ordered.  Pay shipping (from Canada)
and they're yours.

Cheers

=====
MJ Brush
LeftClick.ca Internet Media Services
mbrush@[NOSPAM]leftclick.ca

______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca

--
http://www.piclist.com hint: To leave the PICList
.....piclist-unsubscribe-requestKILLspamspam@spam@mitvma.mit.edu

2004\07\09@160049 by Michael Olson

flavicon
face
Matthew Brush wrote:

>>How many do you need, and which sizes? I have some,
>>but you'll have to
>>pay the postage (I'm in the Netherlands)
>>
>>
>
>Same here, I have a plastic grocery bag full of them
>from samples I ordered.  Pay shipping (from Canada)
>and they're yours.
>
>Cheers
>
>=====
>MJ Brush
>
>

I need at least 10 thin, and 4 wide tubes of at least 10" length, plus
end stoppers. If either of you are interested
in selling some just e-mail me off list.

Thanks,
   Michael
   olsonspamKILLspamcs.odu.edu

--
http://www.piclist.com hint: To leave the PICList
.....piclist-unsubscribe-requestKILLspamspam.....mitvma.mit.edu

2004\07\09@202545 by Dwayne Reid

flavicon
face
At 02:00 PM 7/9/2004, Michael Olson wrote:
>Matthew Brush wrote:
>
>I need at least 10 thin, and 4 wide tubes of at least 10" length, plus
>end stoppers. If either of you are interested
>in selling some just e-mail me off list.

But where are you located?  I'm sure that many of us have those tubes for
the asking but it doesn't make sense for us in Canada to ship them to you
if you are in Australia, nor does it make sense the other way around.

dwayne

--
Dwayne Reid   <EraseMEdwaynerspam_OUTspamTakeThisOuTplanet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 20 years of Engineering Innovation (1984 - 2004)
 .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
    `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-requestspamspam_OUTmitvma.mit.edu

2004\07\09@225141 by Michael Olson

flavicon
face
Dwayne Reid wrote:

> At 02:00 PM 7/9/2004, Michael Olson wrote:
>
>> Matthew Brush wrote:
>>
>> I need at least 10 thin, and 4 wide tubes of at least 10" length, plus
>> end stoppers. If either of you are interested
>> in selling some just e-mail me off list.
>
>
> But where are you located?  I'm sure that many of us have those tubes for
> the asking but it doesn't make sense for us in Canada to ship them to you
> if you are in Australia, nor does it make sense the other way around.
>
> dwayne

A good point, I'm in Souther Virginia, USA.

Thanks,
     Michael
     <@spam@olsonKILLspamspamcs.odu.edu>

--
http://www.piclist.com hint: To leave the PICList
KILLspampiclist-unsubscribe-requestKILLspamspammitvma.mit.edu

2004\07\10@001619 by PicDude

flavicon
face
Bummer you should ask now.  I threw away at least that may tubes about a week ago during a major cleanup.  I can recommend calling Bob at MC Howard Electronics (local to me) ... http://www.mchoward.com .  He (really nice guy) sells gobs of surplus parts (store and thru ebay), and I'm sure he has tons to sell or give away.  Or if you can wait a few days, I will probably swing by some time this coming week.

Cheers,
-Neil.



On Friday 09 July 2004 07:24 pm, Dwayne Reid scribbled:
{Quote hidden}

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

2004\07\10@174255 by Randy Abernathy

picon face
In a message dated 7/9/2004 10:53:09 PM Eastern Daylight Time,
RemoveMEolsonTakeThisOuTspamCS.ODU.EDU writes:

A good  point, I'm in Souther Virginia, USA.

Thanks,
Michael



_http://www.jameco.com_ (http://www.jameco.com)  should have them  for you.



Randy  Abernathy
4626 Old Stilesboro Road NW
Acworth, GA 30101-4066
Phone /  Fax: 770-974-5295
Mobile: 678-772-4113
E-mail:  spamBeGonecnc002spamBeGonespamaol.com

I furnish technical support, repair, and other  related services for your
industrial woodworking machinery. My background as  Senior Service Engineer for
the SCMI Group for nearly fifteen years with factory  training, combines with
my extensive background in electronics, mechanics,  pneumatics, electrical and
CNC machinery to offer you needed support for your  machinery.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

More... (looser matching)
- Last day of these posts
- In 2004 , 2005 only
- Today
- New search...