Searching \ for '[ot]GELP WITH PCB LAYOUT' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'GELP WITH PCB LAYOUT'.

Exact match. Not showing close matches.
PICList Thread
'[ot]GELP WITH PCB LAYOUT'
1999\09\20@181632 by Walter Markiw

flavicon
face
I have recently downloaded freeware EASYTRAX from PROTEL , the DOS PCB
design tool.I somehow can't figure out how to print a pcb layout with
my stylus color 300 .Could any of you help me out on this one?If not on
EASYTRAX,advice on  any other design tool available as freeware on
the net would be appreciated.

1999\09\20@192544 by Bob Drzyzgula

flavicon
face
I'd recommend Eagle, from http://www.cadsoft.de. It's
available in a freeware version (limited to two
layers -- top and bottom -- and 100mm x 80mm surface
area) for DOS, Windows and Linux. If your board fits
in those limits, it's an excellent, well-supported
solution that continues to be upgraded in sync with the
standard and professional versions (which cost $600 US
and $1200 US respectively). Output driver support in
Eagle is very good; you can simply print a screen
view to a normal printer, or you can output a high-precision
CAM job to any of a large number of output devices such
as Gerber, HPGL, and several popular printers including
eight styles of Epson.

--Bob

On Mon, Sep 20, 1999 at 06:16:32PM -0400, Walter Markiw wrote:
>  I have recently downloaded freeware EASYTRAX from PROTEL , the DOS PCB
> design tool.I somehow can't figure out how to print a pcb layout with
> my stylus color 300 .Could any of you help me out on this one?If not on
> EASYTRAX,advice on  any other design tool available as freeware on
>  the net would be appreciated.

--
============================================================
Bob Drzyzgula                             It's not a problem
spam_OUTbobTakeThisOuTspamdrzyzgula.org                until something bad happens
============================================================
       http://www.drzyzgula.org/bob/electronics/
============================================================

1999\09\21@040122 by wzab

flavicon
picon face
On Mon, Sep 20, 1999 at 06:16:32PM -0400, Walter Markiw wrote:
>  I have recently downloaded freeware EASYTRAX from PROTEL , the DOS PCB
> design tool.I somehow can't figure out how to print a pcb layout with
> my stylus color 300 .Could any of you help me out on this one?If not on
> EASYTRAX,advice on  any other design tool available as freeware on
>  the net would be appreciated.

You always can create the Postscript output, and then print it on almost any
printer with Ghostscript.
--
                             Wojciech M. Zabolotny
       http://www.ise.pw.edu.pl/~wzab  <--> .....wzabKILLspamspam@spam@ise.pw.edu.pl

http://www.gnupg.org  Gnu Privacy Guard - protect your mail & data
                     with the FREE cryptographic system

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...