Searching \ for '[buy] Anyone have two or three working dot matrix' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=anyone+two+three
Search entire site for: 'Anyone have two or three working dot matrix'.

Exact match. Not showing close matches.
PICList Thread
'[buy] Anyone have two or three working dot matrix '
2009\07\22@132141 by AGSCalabrese

picon face
I want to experiment with dot matrix impact print heads.

Gus Calabrese

2009\07\22@135115 by jim

flavicon
face
Okay, proceed.
----- Original Message -----
From: "AGSCalabrese" <spam_OUTagscalTakeThisOuTspamgmail.com>
To: "Microcontroller discussion list - Public." <.....piclistKILLspamspam@spam@mit.edu>
Sent: Wednesday, July 22, 2009 12:21 PM
Subject: [buy] Anyone have two or three working dot matrix impact print
heads ?


>I want to experiment with dot matrix impact print heads.
>
> Gus Calabrese
> --

2009\07\22@141832 by Dario Greggio

face picon face
AGSCalabrese ha scritto:
> I want to experiment with dot matrix impact print heads.


i possibly saved stepper motors from dot-printer and inljet, but not
heads...

2009\07\22@144513 by AGSCalabrese

picon face
right on, Jim   Thanks   I will need your address.  Oh ......  just  
noticed some of the text on the original e-mail was left off.  NO  
biggie.  The missing text just asked for a volunteer to let me apply  
impact print heads to their skull at varying drive voltages.  I  
presume that you are volunteering.
Best
Gus


{Quote hidden}

>> --

2009\07\22@144812 by AGSCalabrese
picon face

On Jul 22, 2009, at 11:21 AM, AGSCalabrese wrote:

I want to experiment with dot matrix impact print heads.
I am in Denver, CO USA

I want to see if the rods in the heads can be used to push viscous  
liquids out a nozzle.
OR
I want to see if the rods in the heads can be used to valve* viscous  
liquids out a nozzle.

* is valve a verb ?

Gus Calabrese

2009\07\22@145706 by Marcel Duchamp

picon face
AGSCalabrese wrote:
> On Jul 22, 2009, at 11:21 AM, AGSCalabrese wrote:
>
> I want to experiment with dot matrix impact print heads.
> I am in Denver, CO USA
>
> I want to see if the rods in the heads can be used to push viscous  
> liquids out a nozzle.
> OR
> I want to see if the rods in the heads can be used to valve* viscous  
> liquids out a nozzle.
>
> * is valve a verb ?
>
> Gus Calabrese

Gonna make a solder paste dispenser? Print your paste onto pcbs?

2009\07\22@154828 by jim

flavicon
face
Sure,  but I will tell you now that my skull will withstand impacts from the
highest voltage you can supply to a printhead.

All kidding aside, the throw on an impact printhead is only a 100 mils or
less typically.  I don't know what you have in mind, but this is a rather
short distance.   And I will look in my junk box.  I may still have one or
two left in there.  If I do, you pay to ship them to you, and you can have
them.

Regards,   Jim


{Original Message removed}

2009\07\22@200813 by AGSCalabrese

picon face
I am planning to push acrylic paint onto a cloth surface that primates  
wear on
their upper bodies.   OMG
Gus


On Jul 22, 2009, at 12:56 PM, Marcel Duchamp wrote:

AGSCalabrese wrote:
{Quote hidden}

Gonna make a solder paste dispenser? Print your paste onto pcbs?

2009\07\22@201340 by AGSCalabrese

picon face
Jim
I will be happy to pay shipping and buy you a root beer float.
I sure am excited about the skull experiment.
I will ship you the completed driver circuit next week.  I am thinking
that more than 13KV at 300A will destroy the insulation before the rod  
gets
going.  What is your recommendation ?
Gus

{Quote hidden}

> {Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2009 , 2010 only
- Today
- New search...