Searching \ for '[SX] SX28 programming.' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/devprogs.htm?key=sx28
Search entire site for: 'SX28 programming.'.

Exact match. Not showing close matches.
PICList Thread
'[SX] SX28 programming.'
2006\02\25@133857 by bloody-orcn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bloody-orc wrote:

Hello
I'm now to here
Is there any kind person near Estionia(or in) who could program one code snipet into one SX28 chip. i just need to program one chip for my camera so i wouldnt like to buy SX-key for 30$ (or 50 here in estonia). i would be very greatful if someoune could send me a chip via mail. contact me on my emayl at rellermaa@gmail.com or @ MSN on rellermaa@hotmail.com (no spam please). i will pay all charges if needed and provide the software for the chip.

Thank you in advance
Rain Ellermaa
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\25@134103 by Jon Williamsn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Jon Williams wrote:

You should post your code requirements, Rain, and let the group work through the program.  Once it's done I'm sure somebody can program and send you a chip if there are no local programmers.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m111613
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\25@141015 by bloody-orcn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bloody-orc wrote:

trying to program this unit. cant find the soft at that leta time of the night. will find it in the morning.

http://www.cs.cmu.edu/~cmucam/ (unit is here)
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m111617
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\25@142009 by Jon Williamsn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Jon Williams wrote:

You should be able to get a chip from CMU, no?

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m111619
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\26@014012 by bloody-orcn/a
flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bloody-orc wrote:

Thanks for your replys what chip do you mean? the SX28? that i was going to order. and i cant find any other chips in the schematic. MAX chips i have loads.
the program(HEXfile) can be found here: http://www.cs.cmu.edu/~cmucam/Downloads/CMUcam1_12.zip and i cant order the preprogrammed chip from theyr website sadly if this is what you mean.

Regards
Rain
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m111696
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\27@074312 by bloody-orcn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bloody-orc wrote:

is there anyone that could program one SX28 and send it to me? if yes contaact me on my e-mail at rellermaa@gmail.com (no spam please).

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m111960
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\28@032531 by javalinn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, javalin wrote:

I (for one) am unclear as to what you are trying to achieve!

The CMU-CAM 1/2 is sold as a complete item, i.e. you cannot buy all the components and "build it your self".  Also I am 99.9% sure they do not release their code for programming SX's parts.  Additionally they use a SX48/52 chip - so you cannot use an SX28.

That said, if you are trying to update your firmware on the built in camera (the built-in) SX48/52 (cannot remember which off hand) you will need a SX-key and the camera in the same place.

From their website => "The CMUcam2 comes with the firmware pre-programmed and does not have to be re-programmed under normal operation. If necessary, firmware updates can be performed by the company through which the CMUcam2 was purchased."
More information required!!

james
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m112188
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\28@095310 by Chris Savagen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Chris Savage wrote:

Actually the CMUCam 1 does use an SX28 and while I haven't verified the authenticity of the code at the link it does appear to be a HEX file for the firmware.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m112248
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\28@103624 by javalinn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, javalin wrote:

ah,  I was talking about the CMUcam2!

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m112256
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\02\28@124529 by bloody-orcn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bloody-orc wrote:

no the cam2 is too complex for me and as you know it aint free for taking. i'm trying to make cam1. so if anyone could be so kind and make one for me i would apreciate it a lot (and i pay the costs)
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m112280
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)


'[SX] SX28 programming.'
2006\03\01@092436 by javalinn/a
flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, javalin wrote:

Rain,
If you PM (private message) your address to me I will program an SX28 with the CMUCam1 firmware.  As long as the postage (from UK) isn't much - i'm not worried about the costs.

James
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m112463
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\03\01@115031 by javalinn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, javalin wrote:

Hi Rain,
Send me your address via PM (Private Message), and I will program and send an SX28 with the CMUCAM v1 firmware.

No charge for this, but share your experience with the forum - post an entry in the Project forum to let us know how you get on!

James
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=111612#m112494
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2006 , 2007 only
- Today
- New search...