Searching \ for '[SX] SX Key Editor - Default Location for New File' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/devices.htm?key=sx
Search entire site for: 'SX Key Editor - Default Location for New File'.

Exact match. Not showing close matches.
PICList Thread
'[SX] SX Key Editor - Default Location for New File'
2006\11\05@085612 by John Kauffmann/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, John Kauffman wrote:

Is there a way in the SX-Key Editor to change the default folder for new SXB files?

Thanks.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=153473
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\11\07@120800 by PJMontyn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, PJMonty wrote:

John,
I want to make sure I understand the question.  When you say, "The default folder for new SX/B files," are you referring to the initial directory used by the "Save As" dialog?  If so, not really.  The IDE always uses the path from the last time you saved that file as the initial directory for the "Save As" dialog.  In the case of a new SX/B file, it has no existing path, so it uses whatever path was last used to save a file.  Once you save the new SX/B file the first time, then that path will be used as the default each time you do a "Save As" again.

[list]Thanks,
PeterM


---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=153473#m153903
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\11\07@213555 by John Kauffmann/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, John Kauffman wrote:

Thanks.
I was hoping for a Word-like "File Location" that would be the default path at start-up for Open and SaveAs.
Another idea to throw in the folder of summer intern projects.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=153473#m153971
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\11\07@235227 by George Herzogn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, George Herzog wrote:

BTW, in general the SX-Key and other Parallax IDEs are set up to have the 'project files' in a sub-directory of the IDEs Program files.

I believe this is intended to ease the IDE's management of searches by limitng to it's own directory.  With SPIN, this is quite important as all the objects have to be found to make something work.

In my case, I keep a separate hard-drive to Archive my creative efforts and hopefully avoid loss from a virus hit.  But, it is up to the user to manage such fragmented locations.  I tend to end up with a lot of housekeeping.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=153473#m153987
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2006 , 2007 only
- Today
- New search...