Searching \ for '[SX] SX/B GIU InterfaceF?=' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/languages.htm?key=sx
Search entire site for: 'SX/B GIU InterfaceF?='.

Exact match. Not showing close matches.
PICList Thread
'[SX] SX/B GIU InterfaceF?='
2008\07\25@170035 by Dave2357n/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Dave2357 wrote:

I am looking for a way to add a GUI to the SX/B program I have working.

I have a particular timing pattern needed to program a chip. I set up the timing in in two subs. I call the sub for either a 1 or 0 pulse.

I would like to control this externally so the pattern, 42 bits in all can be set quicker and a single button to save/assemble/run?

Can this be done with the SX/b? If so any examples?

Thanks
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=281414
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)

2008\07\26@062049 by Timothy D. Swietern/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Timothy D. Swieter wrote:

Dave -
I am not sure I understand fully what you are looking for.  Let me try and offer advice any way.

It sounds like you are looking to code some tools to help you generate code or to generate a table in SX/B.  I have two ideas.  One idea is to use Excel and setup different cells to input your data.  Then have other cells piece together the strings of text and code.  Finally the assembled strings can be copied from Excel and into SX/B.  
Another program would be the free Visual Basic Express or the C variant.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=281414#m281476
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)

2008\07\28@082550 by Dave2357n/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Dave2357 wrote:

Hi Timothy,
You have the basic idea I was trying to convey. I will try setting it up the table in excel.

Thanks,
Dave
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=281414#m281801
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)

2008\07\28@115150 by JonnyMacn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, JonnyMac wrote:

I have, on several occasions, written simple programs in PBASIC to produce tables for my SX/B code.  You can do it with any language that will produce text output -- simple copy the text into your SX/B and download.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=281414#m281830
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)

2008\07\29@015539 by Capt. Quirkn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Capt. Quirk wrote:

I have a need for the GUI-Bot graphical interface,  modified to program in SX28 and be suitable for young kids (Elementary and Middle school ages). Is it a difficult project to make a similar program?

Bill
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=281414#m281948
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)

2008\07\29@023915 by Timothy D. Swietern/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Timothy D. Swieter wrote:

Bill -

A graphical robot programming application would require work and you should think of it like a compiler.  Here is what I would try and do...

  • First you need to design the hardware and software so it is standardized.  The more standization you do, then the less parameters in the Graphical programming part.  As you add parameters for this and that the complexity will go up.
  • Once the hardware is designed, you need to write a generic software framework for the SX and the robot.
  • In the generic framework you write the various "modules".  You need to ensure the modules are compatible with each other and test the various itterations.
  • From there you can start your graphical interface. The interface will implement the modules you designed in SX.  Essentially the program takes what the user inputs and pieces together code and then programs the SX.  The graphical program is compiling the modules into one large text file of SX code and then passing it to a facility for downloading to the SX.
  • The graphical program can check that modules "go together".  It could also check and verify any input parameters.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=281414#m281951
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2008 , 2009 only
- Today
- New search...