Searching \ for '[SX] SX, Bluetooth AppMod and Servo Questions' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/lib/io/index.htm?key=servo%2Finde+servo
Search entire site for: 'SX, Bluetooth AppMod and Servo Questions'.

Exact match. Not showing close matches.
PICList Thread
'[SX] SX, Bluetooth AppMod and Servo Questions'
2007\03\28@035920 by alkalinen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, alkaline wrote:

Hi,
I am looking at getting the SX Tech Tool Kit PLUS for a project, but I have several questions.

1. Can the SX use the AppMod eb500 Bluetooth adapter (with appropriate flying leads onto a protoboard)? I see no reason why not, but I can only find Basic Stamp examples.

2. Can the SX handle controlling 3 servos simultaneously?

3. Is it possible to do SX development under Linux?

The project is to stabilise a pan-tilt-roll system with an accelerometer (possibly an Analog Devices ADXL202EB) and provide position commands from a PC using bluetooth.

Thanks
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=181315
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)

2007\03\28@042829 by beann/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bean wrote:

1) Yes, the EB500 uses regular serial communications.

2) Yes
3) I don't know ???

Sounds like an interesting project. Do you have any of the hardware built yet ?

Bean.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=181315#m181317
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)

2007\03\28@064030 by JonnyMacn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, JonnyMac wrote:

I just did a project for my Nuts & Volts column (May issue) that uses an SX28 to take a serial stream from a PC to control eight servos and eight digital outputs -- so yes, that can be done.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=181315#m181335
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)

2007\03\31@164616 by alkalinen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, alkaline wrote:

Thanks for the fast reply both of you.

The project is in its early stages, but I am building the replacement to this wearable robot.

I have recently done some work with a Nintendo Wiimote and servo control, and liked the idea of wireless servo control.

Now to wait for that friendly UPS man.....

Cheers
Bob
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=181315#m182094
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2007 , 2008 only
- Today
- New search...