Searching \ for '[SX] Newbie is stumped, SXKEY - "Programming Fail' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/devprogs.htm?key=sx
Search entire site for: 'Newbie is stumped, SXKEY - "Programming Fail'.

Exact match. Not showing close matches.
PICList Thread
'[SX] Newbie is stumped, SXKEY - "Programming Fail'
2002\11\02@164354 by Brad Woods

picon face
So I got my SXKey in the mail two days ago, rigged my breadboard, got some sample code to assemble properly. But no matter what I do SXKey always produces the error "Programming Failed", two days and no progress. I know I'm communicating with the chip and all that, it just won't take, I've read every bit of text I can get my hands on and nothing helps.

Any direction or assistance would be greatly appreciated. Here is the sample code...

device SX28
device turbo,stackx_optionx
reset start_point
org 0
start_point mov !rb,#0 ; make all of port b outputs
mov rb,#0 ; make all port b outputs = 0
sleep ; go to sleep

Sincerely,
Brad Woods

--
http://www.piclist.com hint: To leave the PICList
spam_OUTpiclist-unsubscribe-requestTakeThisOuTspammitvma.mit.edu


More... (looser matching)
- Last day of these posts
- In 2002 , 2003 only
- Today
- New search...