Searching \ for '[SX] Got my SX52 protoboard....need headers' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/devices.htm?key=sx52
Search entire site for: 'Got my SX52 protoboard....need headers'.

Exact match. Not showing close matches.
PICList Thread
'[SX] Got my SX52 protoboard....need headers'
2005\07\13@084840 by cbmeeksn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, cbmeeks wrote:

Got my board today and I am aching to fire it up!

Anyway, I am here at work so I can't test this but I imagine that I can't plug my test wires into those holes and get a good connection.

That means I will need some type of header.  Any good place to get these?  Also, my soldering skills need to be improved so how hard would it be to install them?

Thanks!

cbmeeks
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80465
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\07\13@085608 by Coriolisn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Coriolis wrote:

You are correct that you'll need a header. They are availible through any major distributor, and most of the surplus stores as well. Allelectronics has a 40 pin breakaway header for $0.50. Soldering them is pretty simple. The first time I soldered was installing headers on the MC68HC11 development board and I had no difficulty doind it. The only issue is you shouldn't leave the iron on the joint for too long because the header plastic will start to melt and the pin may shift, but even in this circumstance you almost always end up with a useable header post.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80465#m80468
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\07\13@100636 by cbmeeksn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, cbmeeks wrote:

cool...that's what I thought.

Thanks!

cbmeeks
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80465#m80483
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\07\14@122805 by cbmeeksn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, cbmeeks wrote:

Anyone know where I can get headers (if that is what they are called) that will allow me to easily interface with my breadboard?  Like the ones around the SX52 on the XGS?

Thanks...

cbmeeks
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80465#m80690
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\07\14@124435 by Coriolisn/a
flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Coriolis wrote:

Yeah, those are the female version of the headers (they're called header sockets), Here is one offered by allelectronics.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80465#m80693
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\07\14@125312 by cbmeeksn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, cbmeeks wrote:

thanks!

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80465#m80697
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2005 , 2006 only
- Today
- New search...