Post by thread:[SX] Bad Jump?

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Jon Williams wrote:If you're jumping across a page boundary you need to do this:

CALL @rK_Tab ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88291 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, mrdevis wrote:thanks jon, Thing is, I'm staying in the same page. Nevertheless I tried it, to no avail. :( It seems when I run the prog on the sx-key it runs quite normal, I just seem to get this in the sxsim.

regards, jeroen ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88293 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, mrdevis wrote:hi list, I'll try to discribe this more exact, I have been tinkering with this phenomenon a bit more. It seems that if I over the code in SXSim there is no complaint, but no effect either, that is, table values are not read. However if I into to code spot, I get the error message, which -when ok'd- resets SXSim.

Anybody seen this before? Happy with any clues, cheers, jeroen ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88477 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bean wrote:Jeroen, Does it work if you put each RETW value on it's own line ? RETW 12 RETW 6 RETW 0 RETW 0 RETW 0 RETW 6 Bean.

---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88478 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, mrdevis wrote:It does! That's great, must be some small glitch in sxsim?? is there a bug list for that? Thanks bean!

---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88480 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, g_daubach wrote:Hi Jeroen, thanks for sharing your experience with SXSim. I'll try to reproduce that problem, and will fix it in the next version of SXSim.

---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88493 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

In SX Microcontrollers, SX/B Compiler and SX-Key Tool, mrdevis wrote:

Hello Guenther, You're welcome! and greets from switzerland Jeroen ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88288#m88501 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)