Searching \ for '[SX] 50mhz clock not default in Sx-Key?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/timers.htm?key=sx
Search entire site for: '50mhz clock not default in Sx-Key?'.

Exact match. Not showing close matches.
PICList Thread
'[SX] 50mhz clock not default in Sx-Key?'
2006\01\13@000040 by _BPM_n/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, _BPM_ wrote:

I find it kinda annoying, that every time I open sx-key v 3.10, that I must set my sx-key's clock to 50mhz every time.  Isn't there a way to make it default to 50mhz?  
Should I just install the 50mhz resonator and be done with it?   Can the 50mhz resonator be used with the sxkey?

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=104753
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\01\13@051051 by sammishaln/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, sammishal wrote:

BPM,
If you do not define a FREQUENCY directive the SASM will assume a 50MHZ clock.

No you cannot use a resonator with the SXKey at the same time if you are using DEBUG.
Yes you can if you are not using DEBUG.

But to avoid the trouble with having to set the DEVICE directives every time you can
write them one time and put them in an include file. Then somewhere at the top of
your current file put the statement Include -------.---  (your file name).

There it is done you only have to do it once.

If you are talking about setting the clock using the Menu option on the IDE, then again,
you do not have to do this if you already have a FREQUENCY directive.

Sam
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=104753#m104765
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

2006\01\13@102649 by _BPM_n/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, _BPM_ wrote:

Thanks.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=104753#m104821
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2006 , 2007 only
- Today
- New search...