No exact or substring matches. trying for part
PICList
Thread
'[PICLIST] wwwPic2'
2000\06\25@154123
by
Jeff Frohwein
For anyone interested, Vincent Sanders has taken Denis Petrov's wwwPic
web server, converted the code to picasm, GPL'd the code, and is doing
hardware improvements to the design:
http://www.devrs.com (Select Pic or News)
Also, on my site I've started a Pic/Internet section for all of the
resources that I've been able to locate.
Jeff
2000\06\25@155617
by
Dan Michaels
Jeff Frohwein wrote:
> For anyone interested, Vincent Sanders has taken Denis Petrov's wwwPic
>web server, converted the code to picasm, GPL'd the code, and is doing
>hardware improvements to the design:
>
> http://www.devrs.com (Select Pic or News)
>
> Also, on my site I've started a Pic/Internet section for all of the
>resources that I've been able to locate.
>
Jeff, I have an "embedded Internet" section on my site, you might
find some useful links there. Some good tek articles are cited.
http://www.sni.net/~oricom/emerge2.htm
best regards,
- Dan Michaels
Oricom Technologies
===================
'[PIC]: wwwPIC2 minor communication problem'
2001\09\04@200536
by
Rob Symmans
|
Hi Guys, I've constructed Vince Sanders wwwPIC2 project and am having a
small problem talking to it. The following occurs:
1 Hardware connected to com2
2 Running win 2000 I have com 2 set up as a SLIP "dial up" connection.
3 I start the SLIP connection and see "OK" in the terminal window.
4 I start IE5 (connection set to default to SLIP on com2)
5 I try to connect to the hardware by placing the address 198....... (I dont
have the address with me) in the URL bar on IE5 etc.
6 Nothing happens.
Using a CRO and viewing the com port via a montoring program I can see the
port open and the "OK" message arrive but no further action occurs. It is as
if my browser is not trying to communicate via the com port. I dont get the
"page not found" error.
I have used a 4MHz xtal, but changed the firmare to suit - the "ok" returned
suggests to me that the hardware is functioning ok.
Any suggestions as to what I am doing wrong?
thanks in advance
Rob
Australia.
--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
2001\09\05@082921
by
Andy N1YEW
Is it a dial-up SERVER or client?
you need to run the server on the pc.
you also need to assign the pc an ip you know...
$.02
andy
{Original Message removed}
More... (looser matching)
- Last day of these posts
- In 2001
, 2002 only
- Today
- New search...