> -----Original Message-----
> From: pic microcontroller discussion list
> [PICLISTKILLspamMITVMA.MIT.EDU]On Behalf Of Matthew Mucker
> Sent: Thursday, February 15, 2001 3:17 PM
> To: .....PICLISTKILLspam.....MITVMA.MIT.EDU
> Subject: Re: [PIC]How to USB on PIC16C765
> I too am on a quest to learn USB with a PIC. The USB
> standard is so bloated
> it's almost indecipherable.
> I'm planning to start with a HID device. That way, you don't
> need to write a
> Windows driver. My very first attempt will probably be 4
> pushbuttons. To
> test it, I'll load up flight simulator and try to assign the
> buttons to
> flaps up, flaps down, etc. If I can use my buttons to extend
> and retract
> the flaps, it'll be considered working!
> BTW, where were you able to find the 16C765? I can't find any of the
> erasable parts anywhere. If you know of a source, please do tell!
> (BTW, I found the book "USB Complete" to be helpful, as well
> as hundreds of
> printed pages from http://www.usb.org.)
> > -----Original Message-----
> > From: pic microcontroller discussion list
> > [EraseMEPICLISTspam_OUTTakeThisOuTMITVMA.MIT.EDU]On Behalf Of Niklas Wennerstrand
> > Sent: Thursday, February 15, 2001 2:10 PM
> > To: PICLISTspam_OUTMITVMA.MIT.EDU
> > Subject: [PIC]How to USB on PIC16C765
> > Hello,
> > I'm on a hunt for information on how to implement USB in a
> > I was thinking that someone have developed some simple
> application and
> > willing to share the information on how to do it (simple
> USB???;-). Some
> > home page with a project or anything with a PIC and USB.
> > In an ideal world someone have developed a simple Widows driver for
> > connection to the PIC16C765 to just send and receive data
> but I have not
> > found that yet. A lot of USB driver development kits and
> stuff is easy to
> > find but to a plain mortal like me that never have written
> Windows driver
> > it's a bit tricky to get USB to work in an easy manner.
> > Microchip support a template for setting up the PICmicro
> but no Windows
> > driver. The template is just to get started with the
> enumerations and
> > stuff.
> > USB is easy to use for the end user but to do the firs
> > application with USB
> > takes a lot of effort.
> > Consider that Cypress that have been into USB for a long time do
> > not use USB
> > for their development USB kit.(plain RS232 there)
> > That makes one think doesn't it?
> > In an ideal world I would like to accesses a driver trough
> Visual Basic or
> > similar and some easy way to get a vendor number into the device
> > driver and
> > such.
> > So is there any on this list that have some nice links to offer?
> > Regards
> > Niklas Wennerstrand
> > --
> > http://www.piclist.com hint: To leave the PICList
> > @spam@piclist-unsubscribe-requestKILLspammitvma.mit.edu >
> http://www.piclist.com hint: To leave the PICList