Searching \ for ' Archive?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=archive
Search entire site for: 'Archive?'.

No exact or substring matches. trying for part
PICList Thread
'Where's the pic list archive?'
1996\06\19@093930 by 9 NPL, 2227

flavicon
face
   Is the an archive of PIClist - if so, where is it?

   cheers

       Steve


'Are the PICLIST TOPICS searchable in an archive?'
1996\12\18@192827 by Customized Controller Solutions
flavicon
face
Hello,

Are the PICLIST TOPICS searchable in an archive?

How would this be done.  I've looked at the REFCARD.  Could have
missed it.

Thanks in advance for the reply.

Brent

1996\12\18@203318 by MSI: Sean Cunningham

flavicon
face
I spent some time this morning figuring out how to do this, it isn't
exactly intuitive.

To search past postings, send a msg to

spam_OUTlistservTakeThisOuTspammitvma.mit.edu

with something similar to the following in the body

Database Search DD=Rules
//Rules DD *
Search ("IR" or "I.R" or "INFRA") in PICLIST
INDEX

The index command will send back a list of article #s that match your
criteria, including subject lines.  Then, to retrieve certain messages,
send this:

Database Search DD=Rules
//Rules DD *
Search ("IR" or "I.R" or "INFRA") in PICLIST
print body of 007411 007415 007416 007420 007431

{Quote hidden}


'PICLIST Archive?'
1998\01\28@100803 by Dan Larson
flavicon
face
Does an archive of this list exist?

TIA

Dan

1998\01\28@103827 by Charles Laforge

picon face
Hi Dan

You can find an archive at http://www.iversoft.com/piclist/

The server there is pretty slow but what can you do...

Charles

{Quote hidden}

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

1998\01\28@203558 by anick

flavicon
face
I'm working on getting a faster link. The server is a P120 W/24M RAM.
the SLOWNESS comes from a CGI being required to do a lookup for every
query. I'm trying to modify Hypermail to support the listserv LOG files
that some of the archive uses to replace the LWgate that is currently
used. Hypermail pre-proccesses all of the mail so that the server only
has to send the HTML files for the link selected, and this is MUCH
faster.
Also the Net Link is on a shared 28.8K dedicated line. I'm trying to get
it up to at least 256K Fractional T1 or even a full T1, just about
anything better than what its on now.

I have even thought of putting some of the stuff on a different server,
but it would use up all of my afailble disk space, (I'm only allowed 5
Meg, and the Archive is around 30Meg) the server It's on now I have all
I want and am going to be adding another 800Meg soon.

Please be patient, It's just barely better than nothing.

Charles Laforge wrote:
{Quote hidden}

1998\01\28@203745 by David Tait

flavicon
picon face
> Does an archive of this list exist?

Someone has already mentioned the very useful WWW PICLIST archive but
the list server itself also holds old stuff.  My WWW page mentions it
I think; I forget the details - send something like "GET PICLIST date"
(where date defines month and year) to RemoveMElistservTakeThisOuTspammitvma.mit.edu.  The
listserver will then mail you a (big) file with old PICLIST traffic.

David
--
http://www.man.ac.uk/~mbhstdj/piclinks.html


'List archive?'
1998\09\29@131203 by blacet
flavicon
face
Does this list have an archive to search?

Regards.
-------------------------
John Blacet
Blacet Research Music Electronics
-------------------------
spamBeGoneblacetspamBeGonespammetro.net
http://metro.net/blacet/music.html

'Pic LIst Archive?'
1998\09\30@112337 by blacet

flavicon
face
I tried this link and it was 404.

http://cdr.stanford.edu/people/luehrb/up/pic/

Any suggestions?

Regards.
-------------------------
John Blacet
Blacet Research Music Electronics
-------------------------
TakeThisOuTblacetEraseMEspamspam_OUTmetro.net
http://metro.net/blacet/music.html


'The realtime PICLIST archive?'
1999\09\28@065900 by wzab
flavicon
picon face
Hi All!

What happend to the realtime PICLIST archive
(http://www.infosite.com/%7Ejkeyzer/piclist/) it stopped updating on Sep.
20.

--
                             Wojciech M. Zabolotny
       http://www.ise.pw.edu.pl/~wzab  <--> RemoveMEwzabspamTakeThisOuTise.pw.edu.pl

http://www.debian.org  Linux - free OS for free people!


'[PICLIST] Archive?'
2001\07\04@074732 by Alexandre Domingos F. Souza
flavicon
face
>>        What happened to Ramsey?
>This "exact" issue was discussed on piclist a few months ago.
>You might search the archives because, as I recall, the resolution
>of the situation was given there.

       Thanks, but an easier way would say "what happened was blah blah blah", since searching and reading a thread in the archives is a pain in the @sz...


---8<---Corte aqui---8<----

Alexandre Souza
taitoEraseMEspam.....terra.com.br
http://planeta.terra.com.br/lazer/pinball/

---8<---Corte aqui---8<----

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email EraseMElistservspammitvma.mit.edu with SET PICList DIGEST in the body


2001\07\04@105355 by Dan Michaels

flavicon
face
Alexandre Souza wrote:
>>>        What happened to Ramsey?
>>This "exact" issue was discussed on piclist a few months ago.
>>You might search the archives because, as I recall, the resolution
>>of the situation was given there.
>
>        Thanks, but an easier way would say "what happened was blah blah
blah", since searching and reading a thread in the archives is a pain in the
@sz...
>


Hi Alexander, actually I have to disagree with you. It is "extremely"
easy to search the actual piclist archives. Go to the archive page
shown below, scroll to the search window at the bottom, and enter
the search topic.

http://www.infosite.com/~jkeyzer/piclist/

I just did this on "FCC crackdown" and came up with the thread
in question in approx 10 seconds. June 2000.

cheers,
- dan michaels
http://www.oricomtech.com
=======================

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email RemoveMElistservEraseMEspamEraseMEmitvma.mit.edu with SET PICList DIGEST in the body



'[EE] eagle searchable archive?'
2006\02\21@155849 by Bob J.
picon face
I was wondering if anyone knew of a slick way to search Cadsoft's eagle
newsgroups.  I always seem to get stumped by simple things, and end up
spending time trying to sort through Google results to find the answer I
need.  I'm thinking that there might be a way where I could download all of
the past Cadsoft newsgroup postings (realizing that if it were possible it
would take time) and let Google Desktop sort it out.  Any ideas?  My Outlook
Express reader can can only go back a few months, I'm assuming messages get
archived at the server.

Anyway, what led me to this question is I have to add some pads to my board
for external soldered wire connections, and am wondering what appropriate
hole sizes correlate to soldered wire gauge sizes.

Regards,
Bob

2006\02\21@180834 by alan smith

picon face
Not cadsoft, but there is a yahoo group, searchable message board
 
 
   http://groups.yahoo.com/group/eaglecad/



                       
---------------------------------
Yahoo! Mail
Use Photomail to share photos without annoying attachments.

2006\02\21@233609 by Denny Esterline

picon face
I just use outlook express. If you just download all the headers it only
takes a few minutes (ok maybe 20 on dial up) then I use OE's search function
to search in the titles and download messages that look relevant. Might not
be the best way, but it works ok for me.

-Denny



On 2/21/06, Bob J. <RemoveMErocketbobspam_OUTspamKILLspamgmail.com> wrote:
{Quote hidden}

> -

2006\02\22@035954 by William Chops Westfield

face picon face

On Feb 21, 2006, at 12:58 PM, Bob J. wrote:

>  am wondering what appropriate
> hole sizes correlate to soldered wire gauge sizes.
>
http://rod.info/wire.html ?

My generic "wire" component in eagle has a hole size of .8mm,
which handles up through 21g wire, according the to data there.

I'm not sure if there is a "standard" for how much play there
should be around a lead in a PCB hole.  On one hand, you want
some solder sucked in there, especially if you have PTH.  On
the other hand, you won't want TOO much slop in there...

BillW


'[PIC] Earlier MPLAB Versions Archive?'
2007\09\13@213119 by Bob Axtell
face picon face
Any idea how to download earlier MPLAB versions
off of the Microchip Website?

I THINK I need v7.3 & 7.4. I seem to have an XP
that won't run any ICD2's from v7.6a, so I am dropping
back as I KNOW those versions  worked fine before.

Thanks in advance.

--Bob A

2007\09\13@215250 by Xiaofan Chen

face picon face
On 9/14/07, Bob Axtell <RemoveMEengineerTakeThisOuTspamspamcotse.net> wrote:
> Any idea how to download earlier MPLAB versions
> off of the Microchip Website?
>
> I THINK I need v7.3 & 7.4. I seem to have an XP
> that won't run any ICD2's from v7.6a, so I am dropping
> back as I KNOW those versions  worked fine before.
>
> Thanks in advance.

http://www.microchip.com/mplab/

www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023073

2007\09\13@225937 by Bob Axtell

face picon face
Xiaofan Chen wrote:
> On 9/14/07, Bob Axtell <EraseMEengineerspamspamspamBeGonecotse.net> wrote:
>  
>> Any idea how to download earlier MPLAB versions
>> off of the Microchip Website?
>>
>> I THINK I need v7.3 & 7.4. I seem to have an XP
>> that won't run any ICD2's from v7.6a, so I am dropping
>> back as I KNOW those versions  worked fine before.
>>
>> Thanks in advance.
>>    
>
> http://www.microchip.com/mplab/
>
> www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023073
>  
Thank You, Sir, just what I needed.

--Bob

2007\09\14@055056 by Tamas Rudnai

face picon face
Note that you can download 7.40 but not 7.41, so unfortunately not all
versions are there :-(

Regards
Tamas


On 9/14/07, Bob Axtell <RemoveMEengineerKILLspamspamcotse.net> wrote:
{Quote hidden}

> -

2007\09\14@083107 by Xiaofan Chen

face picon face
On 9/14/07, Tamas Rudnai <spamBeGonetamas.rudnaiSTOPspamspamEraseMEgmail.com> wrote:
> Note that you can download 7.40 but not 7.41, so unfortunately not all
> versions are there :-(
>

7.41 is an interim version and in general not recommended for
production usage. That being said, I do not use PICs in the
current job so I am using 7.62 at home. I just got the chance
to design in a Microchip part thanks to Atmel's obsolescence of
a serial I2C EEPROM.

Regards,
Xiaofan

More... (looser matching)
- Last day of these posts
- In 2007 , 2008 only
- Today
- New search...