Searching \ for ' +AFs-PIC+AF0-: ICSP Question' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=icsp
Search entire site for: 'ICSP Question'.

No exact or substring matches. trying for part
PICList Thread
'[PICLIST] +AFs-PIC+AF0-: ICSP Question'
2001\09\17@112707 by Lawrence Lile

flavicon
face
Ron,

(added the +AFs-PIC+AF0-: tag)

I typically leave all other I/O hooked up to the PIC, and run the PIC off my
project's 5 volt power supply as well.  I isolate MCLR with a diode and
resistor, and leave RB6 and RB7 dedicated to programming.  The PIC does need
5 volts to get programmed, and your programmer typically is limited in how
much power it can supply to your board, so I let the board supply handle
this task.

I've tried several times to get circuits working with isolating jumpers to
RB6 and RB7, but it was as they say +ACI-too much monkey business+ACI-.  One of
these days I'll be so strapped for I/O lines I'll have to make this work.

-- Lawrence Lile



{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2001 , 2002 only
- Today
- New search...