Searching \ for '[PIC] Pic kit2 programmer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=programmer
Search entire site for: 'Pic kit2 programmer'.

Exact match. Not showing close matches.
PICList Thread
'[PIC] Pic kit2 programmer'
2009\03\22@122952 by Joshua Shriver

picon face
I picked up a pickit2 programmer a while back of ebay. I appreciate
all the help so far, but have one mroe question.

It requires a ICSP (cable?) to actually program the pics. It looks
like it connects via USB, then has a ICSP socket with 6 pins to attach
to the programming cable.

Where do I get one of these and how do you actually use it?

-Josh

2009\03\22@130603 by Funny NYPD

picon face
You can get one from us.
http://augroups.blogspot.com/2009/02/bb0703bb0703-pickit-2-user-manual-rev-d.html

And there are many tutorial online from us too, just name a few in the following links:
http://augroups.blogspot.com/2009/02/step-by-step-guide-on-bb0703-pickit-2.html

http://augroups.blogspot.com/2009/02/can-bb0703-pickit-2-work-with-board.html

http://augroups.blogspot.com/2009/01/how-to-program-pics-dip-with-breadboard.html

Also we have cooperated with Microchip PICkit 2 team on developing enhanced PICkit 2 features on source code level, our recent development activity has boosted the Programmer-to-go max. memory capability from 256K byte to 4M bytes.

The source code has been successfully developed and tested on our new BB0703F prototypes (with 512K bytes, 1M bytes, and 4M bytes capabilities.)

The source code (in C language for firmware, C# for PC software) has been submitted to the microchip team, hopefully it will be integrated into the next PICkit 2 firmware and PC software releases.

Funny N.
Au Group Electronics, http://www.AuElectronics.com




________________________________
From: Joshua Shriver <spam_OUTjshriverTakeThisOuTspamgmail.com>
To: Microcontroller discussion list - Public. <.....piclistKILLspamspam@spam@mit.edu>
Sent: Sunday, March 22, 2009 12:29:50 PM
Subject: [PIC] Pic kit2 programmer

I picked up a pickit2 programmer a while back of ebay. I appreciate
all the help so far, but have one mroe question.

It requires a ICSP (cable?) to actually program the pics. It looks
like it connects via USB, then has a ICSP socket with 6 pins to attach
to the programming cable.

Where do I get one of these and how do you actually use it?

-Josh

2009\03\22@135503 by solarwind

picon face
On Sun, Mar 22, 2009 at 11:29 AM, Joshua Shriver <jshriverspamKILLspamgmail.com> wrote:
> I picked up a pickit2 programmer a while back of ebay. I appreciate
> all the help so far, but have one mroe question.
>
> It requires a ICSP (cable?) to actually program the pics. It looks
> like it connects via USB, then has a ICSP socket with 6 pins to attach
> to the programming cable.
>
> Where do I get one of these and how do you actually use it?

One end of the PICKIT2 connects to the USB port. The other end
directly connects to the PIC via 5 pins. You don't need any fancy
cables if you are in a hurry, just stick 5 wires directly into the
PICKIT2 and the other end of the wires into a breadboard. You're done
:)

2009\03\22@182838 by Funny NYPD

picon face
As of the breadboard is mentioned, here is a step by step ICSP tutorial with breadboard (it should apply to all programmers supporting ICSP, such as PICkit 2, PICkit 3, ICD2, ICD3, Real ICE, etc.):
http://www.auelectronics.com/Q8.htm

Funny N.
Au Group Electronics, http://www.AuElectronics.com




________________________________
From: solarwind <.....x.solarwind.xKILLspamspam.....gmail.com>
To: Microcontroller discussion list - Public. <EraseMEpiclistspam_OUTspamTakeThisOuTmit.edu>
Sent: Sunday, March 22, 2009 1:55:01 PM
Subject: Re: [PIC] Pic kit2 programmer

On Sun, Mar 22, 2009 at 11:29 AM, Joshua Shriver <jshriverspamspam_OUTgmail.com> wrote:
> I picked up a pickit2 programmer a while back of ebay. I appreciate
> all the help so far, but have one mroe question.
>
> It requires a ICSP (cable?) to actually program the pics. It looks
> like it connects via USB, then has a ICSP socket with 6 pins to attach
> to the programming cable.
>
> Where do I get one of these and how do you actually use it?

One end of the PICKIT2 connects to the USB port. The other end
directly connects to the PIC via 5 pins. You don't need any fancy
cables if you are in a hurry, just stick 5 wires directly into the
PICKIT2 and the other end of the wires into a breadboard. You're done
:)

2009\03\22@184359 by olin piclist

face picon face
Funny NYPD wrote:
> As of the breadboard is mentioned, here is a step by step ICSP
> tutorial with breadboard (it should apply to all programmers
> supporting ICSP, such as PICkit 2, PICkit 3, ICD2, ICD3, Real ICE,
> etc.): http://www.auelectronics.com/Q8.htm

And here is a general introduction and demystification of ICSP:
http://www.embedinc.com/picprg/icsp.htm


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.

2009\03\23@183338 by John Ferrell

face picon face
I have a similar problem. I found a cable today at Wal-Mart but it is 3 feet
long. It is likely that this much cable will have cross talk in this
application. I intend to cut a chunk out of it and assure the correct wiring
with the splice. I paid about $3.50 for it.

Nothing on the package said RJ11 or RJ12. It is intended as an extension
cable for a three line telephone cable.
John Ferrell  W8CCW

"All that is necessary for the triumph of evil is for good men to do
nothing." -- Edmund Burke
...."The problem with socialism is that you eventually run out of other
people's money."
  MARGARET THATCHER
http://DixieNC.US


{Original Message removed}

2009\03\23@191913 by Funny NYPD

picon face
We have some RJ12 cables (Standard, Reverse, single ended, pogo-pin style) for BB0703/BB0703+, ICD2/3, RealICE, etc.
http://www.auelectronics.com/System-PICkit2.htm

Here is links to the user manual and application notes:
http://www.auelectronics.com/pdfs/PICKit2_Cable_SingleEndCable.pdf

http://www.auelectronics.com/pdfs/CBL_0703_POGO_UserManual.pdf

http://augroups.blogspot.com/2009/01/cbl-0703-pogo.html

http://augroups.blogspot.com/2009/02/can-bb0703-pickit-2-work-with-board.html

Funny N.
Au Group Electronics, http://www.AuElectronics.com




________________________________
From: John Ferrell <@spam@johnferrellKILLspamspamearthlink.net>
To: Microcontroller discussion list - Public. <KILLspampiclistKILLspamspammit.edu>
Sent: Monday, March 23, 2009 6:34:06 PM
Subject: Re: [PIC] Pic kit2 programmer

I have a similar problem. I found a cable today at Wal-Mart but it is 3 feet
long. It is likely that this much cable will have cross talk in this
application. I intend to cut a chunk out of it and assure the correct wiring
with the splice. I paid about $3.50 for it.

Nothing on the package said RJ11 or RJ12. It is intended as an extension
cable for a three line telephone cable.
John Ferrell  W8CCW

"All that is necessary for the triumph of evil is for good men to do
nothing." -- Edmund Burke
...."The problem with socialism is that you eventually run out of other
people's money."
  MARGARET THATCHER
http://DixieNC.US


{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2009 , 2010 only
- Today
- New search...