Exact match. Not showing close matches.
'[PIC] Design of a slip ring system (also known as''
Alan B. Pearce
>To make the slip ring, we used standard copper-clad PCB material
>and mechanically removed copper to leave 4 tracks of about 1/2" ...
I guess you used 1/32 laminate or thinner to get it flexible enough to wrap
I make that a linear speed of just under 24mph, certainly quite fast considering the slow shaft speed! How did you join the ends without a step?
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
More... (looser matching)
- Last day of these posts
- In 2007
, 2008 only
- New search...