This one
Part Number: AC164110 - RJ-11 to ICSP Adapter
$10
Steve
-----Original Message-----
From: spam_OUTpiclist-bouncesTakeThisOuT
mit.edu [.....piclist-bouncesKILLspam@spam@mit.edu] On Behalf Of
Forrest Christian
Sent: 18 December 2011 07:09
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] 6p6c (ICD3) to 6 pin header *cable*
Are you talking about the little board with a 6p6c connector and the
connector like is on the pickit?
Just seems big and awful to do it that way.
I really would like to find a cable for this...
On 12/17/2011 11:43 PM, Steve Smith wrote:
> Microchip do them ... We use them... But before you yse them use a little
> bit of two pack and glue the connector housing to the pcb it will last a
> long long time like this... if not its of limited life... the pins flex
and
{Quote hidden}
Of
{Quote hidden}> Forrest Christian
> Sent: 18 December 2011 03:35
> To: Microcontroller discussion list - Public.
> Subject: [PIC] 6p6c (ICD3) to 6 pin header *cable*
>
> I just bought a couple of ICD3's for development work, and realized that
> I need to convert these to the 1x6 0.1 pitch header I use on all the
> boards I have - I.E. the connector on the PICkit2.
>
> I'm finding lots of circuit boards which do this, and can definitely
> make a cable if I need to, I'd really rather find something made and
> solid and robust.
>
> I do feel like I need a flexible cable, and not a PCB header adapter.
> OR a adapter, and a 1x6 to 1x6 header cable..
>
> I've also looked for simply a single row (1x6) ribbon cable connector or
> similar and no luck there either. I do have some 1x6 connectors which
> work well for this purpose, but the strain relief leaves a lot to be
> desired.
>
> Is there a source for these I'm missing? Or am I just needing to make
> one myself.
>
> -forrest
>
>
